Attachment CK35 Hazard Study 2

This document pretains to SES-LIC-20130528-00457 for License on a Satellite Earth Station filing.

IBFS_SESLIC2013052800457_998166

RF Radiation Hazard Analysis PSSI CK35 1.8m Antenna Diameter (D) = 1.8 meters, 180 cm Antenna Surface Area (SA) = 2.545 m², 25450.00 cm² Sub-reflector Diameter (DS) = N/A Sub-reflector Surface Area (AS) = N/A C-Band Wavelength at 14.250 GHz Center Band, LAMBDA = .021 meters, 2.1 cm Power at output at HPA = 200 watts Path Loss to OMT (IL) = 1.65 dB Power at OMT Flange (P) = 136.77 watts Antenna Gain at 6.1750 GHz (G) = 46.5 dBi Antenna Aperture Efficiency (N) = .627 or 62.7% Region Radiation Level Hazard Assessment Far Field (RF) = 9257.14 cm, 92.57 meters 5.906 mW/cm² Potential Hazard Near Field (RN) = 3857 cm, 38.5714 meter 13.47 mW/cm² Potential Hazard Transition Region (RT) ≤ 13.47 mW/cm² Potential Hazard Sub-Reflector Region (WS) 0 mW/cm² Potential Hazard Main Reflector Region (WM) 21.5 mW/cm² Potential Hazard Power Density between Reflector and Ground 5.37 mW/cm² Potential Hazard Power Density between Reflector Edge and Ground 0.0298 mW/cm² Satisfies ANSI Conclusion: Based on the above analysis, harmful areas of radiation do exist in areas around the antenna and in the path of the antenna toward the satellite that it is pointed. The area occupied by the general public, “uncontrolled environment”, will not exceed the ANSI limit of 1mW/cm² because precautions will be taken to warn, educate and limit the access of personnel around the areas of the antenna and its path that may pose a radiation hazard. The bottom edge of the antenna, which is mounted on top of a truck, is 12 feet high when deployed which moves the hazard away from the public. Normal look angles for domestic operation move the potential hazard even further away from the general public. As well during operation no maintenance personnel or public will be able to have access to the main reflector area. This area has the greatest concentration of radiation, but fortunately is not accessible during operation due to the operational angle of the antenna and the height above ground level. In addition the antenna will be marked with the standard radiation hazard signs. The warning signs will warn personnel to avoid the area around and in front of the reflector when the transmitter is operational. To ensure compliance with safety limits, the Earth Station transmitters will be turned off and marked to remain off whenever maintenance and repair personnel are required to work in the areas of potential hazard as defined in the above study. Additionally, all Earth Station personnel will be trained to insure that the antenna path is clear at all times while the transmitter is in operation. Note: See the following sheet for how the above calculations were made.

Analysis of Non-Ionizing Radiation PSSI CK35 1.8m – Supporting Calculations Antenna Diameter, (D) = ……………… D = 1.8 m D = 180 cm Antenna Surface Area, (Sa) =…………. Sa =   (D  D/4) Sa = 2.545 sq m Sa = 25450.00 cm² Sub Reflector Diameter, (Ds) =……….. Ds = 0 m Ds = 0 cm Sub Reflector Area, (As) =……………. As =   (Ds  Ds/4) As = 0 m² As = 0 cm² Center Frequency, (Cf) =……………… Cf = 14.250 GHz Wavelength at (Cf), (λ) =………. λ = .021 meters λ = 2.1 cm Transmit Power at HPA Flange, (P1) =... P1 = 200 Watts P2 = log (P1)10 P2 = 23.01 dBw Path Loss from HPA to OMT, (Loss) =... Loss = .15 dB HPA Back off from Saturation, (Loss2) =. Loss 2 = 1.5 dB Power at OMT, (P) =…… P3 = P2-Loss-Loss2 P3 = 21.86 dBw (OMT power in dBw) P = 10 P3/10 P = 136.77 Watts (OMT in Watts) Antenna Gain at (Cf), (Gain) =………… Gain = 46.50 dBi Antenna Gain/ Power Ratio, (Ges) =…... Ges = 10Gain/10 Ges = 4.4668-104 Ratio Antenna Aperture Efficiency, (n) =……. n = .627 or n = 62.7% Far Field (Rf) = Rf = (0.6  (D  D))/ λ Rf = 92.57 meters Rf = 9257.14 cm Far Field Pwr Density (Wf) = Wf = (Ges  P)/4    (Rf  Rf) Wf = .005906 W/cm² Wf = 5.906 mW/cm² Near Field (Rn) = Rn = (D  D)/(4  λ) Rn = 38.5714 m Rn= 3857.14 cm Near Field Pwr Density (Wn) = Wn = ((16  n  P)/   (D  D)) Wn = 0.01347 W/cm² Wn = 13.47 mW/cm² Transition Region (Rt) = Rt = Wn  1 Rt ≤ 13.47 mW/cm² Pwr Density at Sub Reflector (Ws) = Ws = (4  P)/ As Ws = 0 W/cm² Ws = 0 mW/cm² Main Reflector Region Pwr Density (Wm) = Wm = (4  P)/ Sa Wm = 0.0215 W/cm² Wm = 21.5 mW/cm² Pwr Density / Main Reflector and Ground (Wg) = Wg = (P/Sa) Wg = 5.37 mW/cm² Pwr Density / Reflector Edge and Ground (WI) = WI = Wg/D WI = 0.0298 mW/cm²


Document Created: 2013-05-28 15:15:08
Document Modified: 2013-05-28 15:15:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC