Attachment Radiation Report

This document pretains to SES-LIC-20120221-00187 for License on a Satellite Earth Station filing.

IBFS_SESLIC2012022100187_940053

ANALYSIS OF NON-IONIZING RADIATION FOR A 1.2 METER EARTH STATION ANTENNA THIS REPORT ANALYZES THE NON-IONIZING RADIATION LEVELS FOR AN EARTH STATION ANTENNA. THE OFFICES OF SCIENCE AND TECHNOLOGY BULLETIN NO. 65, EDITION 97-01, SPECIFIES THAT THE MAXIMUM LEVEL OF NON-IONIZING RADIATION THAT A PERSON MY BE EXPOSED TO OVER A SIX MINUTE PERIOD IS AN AVERAGE POWER DENSITY EQUAL TO 5 mW/cm2 (FIVE MILLIWATTS PER CENTIMETER SQUARED). IT IS THE PURPOSE OF THIS REPORT TO DETERMINE THE POWER FLUX DENSITIES OF THE EARTH STATION ANTENNA IN THE FAR FIELD, NEAR FIELD, TRANSITION REGION, BETWEEN THE SUBREFLECTOR AND THE MAIN REFLECTOR SURFACE. AT THE MAIN REFLECTOR SURFACE AND BETWEEN THE ANTENNA EDGE AND THE GROUND. THE FOLLOWING PARAMETERS WERE USED TO CALCULATE THE VARIOUS POWER FLUX DENSITIES FOR THIS EARTH STATION. Antenna Diameter, (D) = 1.20 meters 120 cm 2 2 Antenna Surface area, (Sa) = 1.13 meters 11309.73 cm Feed Flange Diameter (Df) = 7.62 cm 0.0762 meters 2 2 Area of Feed Flange (Fa) = 45.60 cm 0.005 meters Frequency in GHz 14.25 GHz Wavelength at Frequency ( ) = 2.11 cm 0.0211 meters Transmit Power at Flange (P) = 100.00 Watts Antenna Gain at Frequency (Ges) = 43.10 dB Gain converted to power ratio 20417.38 Antenna Aperture Efficiency (n) = 0.65 Percentage / 100 1. Far Field Calculations: Distance to the far field region (Rf) = 41.04 meters 2 On axis power density in the far field (W f) 0.96 mW/cm 2. Near Field Calculations: Extent of near field (Rn) 17.10 meters 2 Near field power density (W n) 2.30 mW/cm

3. Transition Region Calculations: The maximum power density in the transition region will not exceed that calculated for the near field region. The power density in the near field region, as shown above, will not exceed 2.30 mW/cm2 4. Region between main reflector & subreflector: 2 Power density at feed flange (W f) 4385.61 mW/cm 5. Main Reflector Region: 2 Power density at reflector surface (W s) 3.54 mW/cm 6. Region Between Reflector & Ground: At a distance of one antenna diameter or more 2 Power density between reflector & ground (W g) 0.02 mW/cm Table 1 Summary of Expected Radiation Levels Based on (5 mW/cm2 ) MPE for Controlled Environment Calculated Maximum Region Radiation Level (mW/cm2 ) Hazard Assessment 1. Far Field, (Rf)= 0.96 SATISFIES ANSI 2. Near Field, (Rn )= 2.30 SATISFIES ANSI 3. Transition Region, (Rt) 2.30 SATISFIES ANSI Rn < Rt < Rf 4. Between Main Reflector and subreflector 4385.61 POTENTIAL HAZARD 5. Reflector Surface 3.54 SATISFIES ANSI 6. Between Antenna and Ground 0.02 SATISFIES ANSI It is the applicants responsibility to ensure that the public and operational personnel are not exposed to the harmful levels of radiation.

OF NG AL TO E



Document Created: 2012-02-21 16:20:54
Document Modified: 2012-02-21 16:20:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC