Attachment fccradhaz24STS.doc

This document pretains to SES-LIC-20110727-00858 for License on a Satellite Earth Station filing.

IBFS_SESLIC2011072700858_907940

       EXHIBIT A - ANALYSIS OF NON-IONIZING RADIATION



EXHIBIT A1 - ANALYSES OF NON-IONIZING RADIATION, 2.4 m Ku
HARMFUL LEVELS OF NON-IONIZING RADIATION WILL NOT EXIST IN REGIONS
NORMALLY OCCUPIED BY PERSONNEL.
     CRITERIA: ANSI SPECIFICATIONS REQUIRE THAT PERSONNEL NOT BE
     EXPOSED TO LEVELS OF NON-IONIZING RADIATION EXCEEDING 5 mW / cm2.

THE FOLLOWING ANALYSES SUPPORT THIS DETERMINATION:

FAR FIELD ANALYSIS:

EFFICIENCY                 = h = G/(p*D/l)2 = 0.605
ANTENNA GAIN               = 49.0 dBi (lin 79,433)
ANTENNA DIAMETER           = 2.4 Meters
LAMBDA                     = 3*108 Meters / 14.25*109 Hz = 0.0210526
POWER MAX AT FLANGE        = 500 Watts (27.0 dBW)
DISTANCE TO FAR FIELD      = 2*D2/l
                           = 11.52 / 0.0210526
                           = 547 Meters
ON-AXIS POWER DENSITY      = G*P/4*p*Far Field Distance2
                           = 79,433 * 500 / 12.56637 * 299,209
                           = 10.56 W/m2
                           = 1.06 mW/cm2

LEVEL IS LESS THAN THE 5 mW/cm2 MAXIMUM ANSI LEVEL PERMITTED

NEAR FIELD ANALYSIS (Parallel Beam Region & Transition Region):
PARALLEL BEAM REGION ANALYSIS:
DISTANCE TO END OF PARALLEL BEAM (CYLINDER) REGION:
                         = DIAMETER2 / 2.5 * l
                         = 5.76 / 0.0526315
                         = 109 Meters
POWER DENSITY AT END OF PARALLEL BEAM REGION
                         = P / CYLINDRICAL PARALLEL BEAM AREA
                         = 500 / 4.52
                         = 110.62 W / m2
                         = 11.06 mW / cm2

LEVEL IS GREATER THAN THE 5 mW/cm2 MAXIMUM ANSI LEVEL PERMITTED
ANTENNA IS MOUNTED 10’ IN THE AIR ON TRUCK, NO PERSONNEL WILL
OCCUPY THE PARALLEL BEAM REGION DURING OPERATION.


TRANSITION REGION ANALYSIS:
THIS REGION WILL DECREASE INVERSELY WITH DISTANCE BEGINNING AT THE
END OF THE PARALLEL BEAM REGION WITH 11.06 mW / cm2 AND REDUCE TO
1.06 mW / cm2

MAIN REFLECTOR ANALYSIS:
                            = P / REFLECTOR AREA
                            = 500 / 4.52
                            = 110.62 W / m2
                            = 11.06 mW/cm2

LEVEL IS GREATER THAN THE 5 mW/cm2 MAXIMUM ANSI LEVEL PERMITTED
ANTENNA IS MOUNTED 10’ IN THE AIR ON TRUCK, NO PERSONNEL WILL
OCCUPY THE PARALLEL BEAM REGION DURING OPERATION.

RF POWER WILL BE TURNED OFF DURING ANY ANTENNA MAINTENANCE
REQUIRING PERSONNEL TO OCCUPY ANY HAZARDOUS REGION BETWEEN
THE FEED HORN, SUB-REFLECTOR, REFLECTOR.


PREPARED AND SUBMITTED BY:



BASIL F. PINZONE, JR. 07/27/2011
TECHNICAL CONSULTANT



Document Created: 2011-07-27 10:53:36
Document Modified: 2011-07-27 10:53:36

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC