Attachment Sched S Tech Report.

This document pretains to SAT-MOD-20160527-00053 for Modification on a Satellite Space Stations filing.

IBFS_SATMOD2016052700053_1138385

Approved by OMD Control Number 3060-0678 Estimated Burden Hours: 80 FCC 312 FEDERAL COMMUNICATIONS COMMISSION Page 1: General, Schedule S SATELLITE SPACE STATION AUTHORIZATIONS Frequency Bands, (Technical and Operational Description) and GSO Orbit S1. GENERAL INFORMATION Complete for all satellite applications. a. Space Station or Satellite Network Name: e. Estimated Date of Placement into Service: i Will the space station(s) operate on a Common Carrier Basis: VIASAT-2 N b. Construction Commencement Date: f. Estimated Lifetime of Satellite(s): j. Number of transponders offered on a common carrier basis: 15 Years c. Construction Completion Date: g. Total Number of Transponders: k. Total Common Carrier Transponder Bandwidth: MHz d1. Est Launch Date Begin: d2. Est Launch Date End: h. Total Transponder Bandwidth (no. transponders x Bandwidth) l. Orbit Type: Mark all boxes that apply: MHz GSO NGSO X S2. OPERATING FREQUENCY BANDS Identify the frequency range and transmit/receive mode for all frequency bands in which this station will opera Also indicate the nature of service(s) for each frequency band. Frequency Band Limits f. Lower Frequency (_Hz) Upper Frequency (_Hz) e. T/R Mode Nature of Service(s): List all that apply to this band a. Numeric b. Unit c. Numeric d. Unit (K/M/G) (K/M/G) 27.5 G 28.1 G R Fixed Satellite Service 17.7 G 18.3 G T Fixed Satellite Service S3. ORBITAL INFORMATION FOR GEOSTATIONARY SATELLITES ONLY: a. Nominal Orbital Longitude (Degrees E/W): b. Alternate Orbital Longitude (Degrees E/W): c. Reason for orbital location selection: 69.9 W Longitudinal Tolerance or E/W Station-Keeping: f. Inclination Excursion or Range of orbital are in which adequate service can be N/S Station-Keeping provided (Optional): d. Toward West: Degrees Degrees E/W 0.05 Tolerance: g. Westernmost: e. Toward East: 0.05 Degrees 0.05 Degrees h. Easternmost: i. Reason for service are selection (Optional):

FEDERAL COMMUNICATIONS COMMISSION Page 2: NGSO Orbits SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S4. ORBITAL INFORMATION FOR NON-GEOSTATIONARY SATELLITES ONLY S4a. Total Number of Satellites in Network or System: S4c. Celestial Reference Body (Earth, Sun, Moon, etc.): S4b. Total Number of Orbital Planes in Network or System: S4d. Orbit Epoch Date: For each Orbital Plane Provide: (e) Orbital (f) No. of (g) Inclination (h) Orbital (i) Apogee (km) (j) Perigee (km) (k) Right Ascension of (l) Argument of Active Service Arc Range (Degrees) Plane No. Satellites in Angle (degrees) Period the Ascending Node Perigee (m) Begin (n) End Angle (o) Other Plane (Seconds) (Deg.) (Degrees) Angle S5. INITIAL SATELLITE PHASE ANGLE For each satellite in each orbital plane, provide the intital phase angle. (a) Orbital (b) Satellite (c) Initial Plane No. Number Phase Angle (Degrees) NO NGSO DATA FILED

FEDERAL COMMUNICATIONS COMMISSION Page 3: Service Areas SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S6. SERVICE AREA CHARACTERISTICS for each service area provide: (a) Service Area (b) Type of Associated (c) Service Area Diagram (d) Service Area Description. Provide list of geographic areas (state postal codes or ITU 3-ltr codes), satellites or Figure No. of ID Station (Earth or File Name (GXT File) Service Area Diagram. Space) SA1 E Previously provided to the Commission. No change.

FEDERAL COMMUNICATIONS COMMISSION Page 4: Antenna Beams SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S7. SPACE STATION ANTENNA BEAM CHARACTERISTICS For each antenna beam provide: (a) (b) Isotropic Antenna (e) (f) (g) Min. (h) Polar- (i) Polarization (j) Service Transmit Receive Beam T/R Gain Pointing Rotational Cross- ization Alignment Rel. Area ID (k) Input (l) Effective (m) (n) (o) G/T (p) Min. Input Attenuator (dB) ID Mode (c) Peak (d) Edge Error Error Polar Iso- Switch- Equatorial Losses Output Max. System Max. Saturation (Degrees) (Degrees) lation (dB) able? Plane (Degrees) (q) Max. (r) Step (dBi) (dBi) (dB) Power (W) EIRP Noice Gain Pt. Flux Density (Y/N) Value Size (dBW) Temp (k) (db/K) (dBW/m2) RXAR R 0.05 0.05 24 N SA1 30.9 -105 RXAL R 0.05 0.05 24 N SA1 30.9 -105 TXAR T 0.05 0.05 24 N SA1 72.7 TXAL T 0.05 0.05 24 N SA1 72.7 RXBR R 0.05 0.05 24 N SA1 22.2 -105 RXBL R 0.05 0.05 24 N SA1 22.2 -105 TXBR T 0.05 0.05 24 N SA1 64.3 TXBL T 0.05 0.05 24 N SA1 64.3

FEDERAL COMMUNICATIONS COMMISSION Page 5: Beam Diagrams SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S8. ANTENNA BEAM DIAGRAMS For each beam pattern provide the reference to the graphic image and numerical data: Also provide the power flux density levels in each beam that result from the emission with the highest power flux density. (a) (b) (c) Co-or (d) GSO (e) NGSO Antenna Gain (f) GSO Antenna Gain Max. Power Flux Density (dBW/M2/Hz) Beam T/R Cross Ref. Orbital Contour Description Contour Data (GXT File) At Angle of Arrival above horizontal (for emission with highest PFD) ID Mode Polar Longitude (Figure/Table/ Exhibit) (g) 5 Deg (h) 10 Deg (i) 15 Deg (j) 20 Deg (k) 25 Deg Mode ("C" (Deg. E/W) or" X") RXAR R C -69.9 RXAL R C -69.9 RXBR R C -69.9 RXBL R C -69.9 TXAR T C -69.9 -118 -118 -118 -118 -118 TXAL T C -69.9 -118 -118 -118 -118 -118 TXBR T C -69.9 -118 -118 -118 -118 -118 TXBL T C -69.9 -118 -118 -118 -118 -118

FEDERAL COMMUNICATIONS COMMISSION Page 6: Channels and SATELLITE SPACE STATION AUTHORIZATIONS Transponders FCC Form 312 - Schedule S: (Technical and Operational Description) S9. SPACE STATION CHANNELS For each frequency channel provide: S10. SPACE STATION TRANSPONDERS For each transponder provide: (a) (B) Assigned (c) (d) Center (e) (f) TTC (a) (b) Receive Band Transmit Band Channel Bandwidth T/R Frequency Polarization or Comm Transponder Transponder (c) Channel (d) Beam (e) Channel (f) Beam ID No. (kHz) Mode (MHz) (H, V, L, R) Channel (T ID Gain (dB) No. ID No. or C) UL01 600000 R 27800 R C T001 UL01 RXAR UL02 600000 R 27800 L C T002 UL02 RXAL DL01 600000 T 18000 L C T003 UL01 RXBR DL02 600000 T 18000 R C T004 UL02 RXBL T005 DL01 TXAL T006 DL02 TXAR T007 DL01 TXBL T008 DL02 TXBR

FEDERAL COMMUNICATIONS COMMISSION Page 7: Digital Modulation SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S11. DIGITAL MODULATION PARAMETERS For each digital emission provide: (a) Digital (b) Emission (c) Assigned (d) No. of (e)Uncoded (f) FEC Error (g) CDMA (h) Total C/N (i) Single Entry Mod. ID Designator Bandwidth Phases Data Rate Correction Processing Performance C/I Objective (kHz) (kbps) Coding Rate Gain (dB) Objective (dB) (dB) D1 600MG7D 600000 D2 500MG7D 500000 D3 6M25G7D 6250 D4 3M13G7D 3125 D5 1M57G7D 1562.5 D6 782KG7D 781.25 D7 3M88G7D 3874

FEDERAL COMMUNICATIONS COMMISSION Page 8: Analog Modulation SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S12. ANALOG MODULATION PARAMETERS For each analog emission provide: (a) (b) Emission (c) (d) Signal (e) Multi-channel Telephony (j) Video (k) Video (l) Video (m) SCPC/FM (n) Total C/N (o) Single Analog Designator Assigned Type Channels Standard Noise- and Compander, Performance Entry C/I (f) Ave. (g) Bottom (h) Top (i) RMS Mod. ID Bandwidth per Carrier NTSC, Weighting SCPC/FM Preemphasis, Objective Objective Companded Baseband Baseband Modulation (kHz) PAL, etc. (dB) Modulation and Noise (dB) (dB) Talker Level Freq. (MHz) Freq. (MHz) Index Index Weighting (dB) (dBm0)

FEDERAL COMMUNICATIONS COMMISSION Page 9: Typical Emissions SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S13. TYPICAL EMISSIONS For each planned type of emission provide: Associated Modulation ID (e) Carriers (f) Carrier (g)Noise Budget (h) Energy Receive Band (Assoc. Transmit Stn) Transmit Band (This Space Station) Transponder ID Range per Spacing Reference (Table Dispersal (c) Digital (d) Analog (i)Assoc. Assoc. Station Transmit EIRP (dBW) (n) Max. Power (o)Assoc. Transponder (kHz) No.) Bandwidth (Table S11) (Table S12) Stn. Max. Power (dBW) Flux Density Stn Rec. (a) Start (b) End (kHz) Antenna (dBW/m2/Hz) G/T Gain (dBi) (j) Min. (k) Max. (l) Min. (m) Max. (dB/K) T001 T008 D1 LB1.docx 67.9 T001 T008 D2 LB2.docx 67.9 T001 T008 D2 LB3.docx 67.9 T001 T008 D2 LB4.docx 67.9 T001 T008 D3 LB5.docx 52.1 T001 T008 D4 LB6.docx 45.9 T001 T008 D5 LB7.docx 42.9 T001 T008 D6 LB8.docx 39.9 T001 T008 D7 LB9.docx 46.8

FEDERAL COMMUNICATIONS COMMISSION Page 10: TT and C SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S14. Is the space station(s) controlled and monitored remotely? If Yes, provide the location and telephone number of the TT and C control point(s): Yes Remote Control (TT C) Location(s): S14a: Street Address: S14b. City: S14c. County: S14d. State/Country S14e. Zip Code: S14f. Telephone Number: S14g. Call Sign of Control Station (if appropriate):

FEDERAL COMMUNICATIONS COMMISSION Page 11: SATELLITE SPACE STATION AUTHORIZATIONS Characteristics and FCC Form 312 - Schedule S: (Technical and Operational Description) Certifications S15. SPACECRAFT PHYSICAL CHARACTERISTICS: S16. SPACECRAFT ELECTRICAL CHARACTERISTICS: S17. CERTIFICATIONS: a. Are the power flux density limits of § 25.208 met?: X YES NO N/A b. Are the appropriate service area coverage requirements of § 25.143(b)(ii) and (iii), or § 25.145(c)(1) and (2) met? YES NO X N/A c. Are the frequency tolerances of § 25.202(e) and the out-of-band emission limits of § 25.202(f)(1), (2) and (3) met? X YES NO N/A In addition to the information required in this Form, the space station applicant is required to provide all the information specified in Section 25.114 of the Commission's rules, 47 C.F.R § 25.114. FCC NOTICE REQUIRED BY THE PAPERWORK REDUCTION ACT The public reporting estimate for this collection of information includes the time for reviewing instructions, searching existing data sources, gathering and maintaining the required data, and completing and reviewing the collection of information. If you have any comments on this burden estimate, or how we can improve the collection and reduce the burden it causes you, please write to the Federal Communications Commission, AMD-PERM, Paperwork Reduction Project (3060-0678), Washington, DC 20554. We will also accept your comments regarding the Paperwork Reduction Act aspects of this collection via the Internet if you send them to PERM@fcc.gov. PLEASE DO NOT SEND COMPLETED FORMS TO THIS ADDRESS. Remember - You are not required to respond to a collection of information sponsored by the Federal government, and the government may not conduct or sponsor this collection, unless it displays a currently valid OMB control number or if we fail to provide you with this notice. This collection has been assigned an OMB control number of 3060-0678. THE FOREGOING NOTICE IS REQUIRED BY THE PAPERWORK REDUCTION ACT OF 1995, PUBLIC LAW 104-13, OCTOBER 1, 1995, 44 U.S.C. SECTION 3507.


Document Created: 2016-06-08 09:05:39
Document Modified: 2016-06-08 09:05:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC