Attachment letter

letter

LETTER submitted by FCC, IB

letter

2008-06-05

This document pretains to SAT-AMD-20080114-00008 for Amended Filing on a Satellite Space Stations filing.

IBFS_SATAMD2008011400008_646826

                                             Federal Com m unications Com m ission
                                                   Washington, DC 20554


International Bureau
                                                            June 5,2008


             Susan H. Crandall, Esq.
             Counsel for Intelsat North America LLC
             3400 International Drive, NW
             Washington, D.C. 20008-3006


                                                          Re:      Intelsat North America LLC
                                                                   17/24 GHz Broadcast-Satellite Service
                                                                   App 1i cati ons

             Dear Ms. Crandall:

                     This letter refers to Intelsat North America LLC's (Intelsat) applications to provide
             Broadcast-Satellite Service (BSS) in the 17/24 GHz frequency bands.' To assist the Satellite
             Division in processing these applications, we request additional information or clarification of the
             following:

                       1) Intelsat requests a waiver of the requirement to include complete beam connectivity
                       information in Section S IO of Schedule S.* Intelsat also requests a waiver of FCC Form
                       3 12 - Schedule S at Section S8 which contains antenna beam diagrams for each beam
                       pattern, and the power flux density levels (pfd) in each beam that results from the
                       emission with the highest power flux d e n ~ i t y .In
                                                                            ~ its requests, Intelsat does not identify
                       the associated rule(s) for which it seeks a waiver. Intelsat must, therefore, amend its
                       applications to include this information. Alternatively, Intelsat may withdraw its requests
                       for waivers and provide, as appropriate, the complete information in Sections S8 and S 10
                       of Schedule S. If Intelsat elects to provide the complete information, we note that for
                       beams operating in the 17.7-17.8 GHz band, the pfd information may be entered into




             'Intelsat North America LLC, File Nos. SAT-LOA-20050210-0003 1, SAT-AMD-200801 14-00008 (Call
             Sign: S2662); SAT-LOA-200502 10-00030, SAT-AMD-20080114-00009 (Call Sign: S266 1 ); SAT-LOA-
             200502 10-00029, SAT-AMD-20080 1 14-00012 (Call Sign: S2660); SAT-LOA-200502 10-00028, SAT-
             AMD-20080 1 14-000 1 1 (Call Sign: S2659).

             ' Section S10 of Schedule S requests information concerning beam connectivity to satellite transponders, as
             required by 47 C.F.R. S 25.1 14(c)(4)(iii). Intelsat requests these waivers at Exhibit D and in the Technical
             Description of its amended applications: SAT-AMD-20080114-00008, Technical Description at p. 10;
             SAT-AMD-20080114-00009, Technical Description at p. 1 1 ; SAT-AMD-20080114-00011, Technical
             Description at pp. 10-1 1 ; and SAT-AMD-20080114-00012, Technical Description at p 1 0.

              Intelsat requests this waiver in its applications at Section 1X.C and in its amended applications at Exhibit
             D. See footnote 1. The antenna beam diagram information should be attached to Section S 8 ( 9 of Schedule
             S or alternatively, may be provided as stand-alone attachments.


            Sections S8(g)-(1) of Schedule S.j However, information demonstrating compliance with
            the 17.3-17.7 GHz band regional pfd requirements cannot be entered into Schedule S, but
            rather must be provided in narrative form in accordance with Section 25.1 14(d)(5).’

            2) As discussed above, Intelsat seeks a waiver of our requirement to provide predicted
            antenna gain contour information for each transmit and receive beam. Accordingly, for
            the GR uplink and UT downlink beams, Intelsat provides only a single representative
            beam diagram.‘ For the UT beam, Intelsat provides pfd calculations for only three
            representative regions of the United States, i. e., southeast, northeast and west.’ Although
            we are unclear which rules Intelsat seeks waivers for, we remind Intelsat that both
            Sections 25.1 14(c)(8) and 25.114(d)(5) require that pfd calculations be provided within
            each coverage area.* In Exhibit 3L, it appears that Intelsat will provide service on its UT
            beam to areas outside of the contiguous United States, including Alaska, Hawaii and
            portions of the Caribbean.9 If these areas are not included in Intelsat’s calculations, it
            must provide the pfd calculations for these geographic areas as well.

            3) In addition, we note that each of Intelsat’s amended applications, at Exhibit 7,
            provides information for six types of emissions: 24MOG7W, 48MOG7W, 360KG7W,
            860KF3D, 250KG7D, and 50KOG7X. In Section 11 of Schedule S, however, Intelsat
            provides information for only three of the six types of emissions: 24MOG7W,
            48MOG7W, and 360KG7W. Section 25.114(c)(4)(ii) of the Commission’s rules requires
            emission designators and allocated bandwidth of emissions to be filed on FCC Form 3 12-
            Schedule S . l o Consequently, the emission designator information for all six carriers
            should be listed within Section S11 andor S12 of Schedule S. Although Intelsat includes
            this information in the narrative sections of its amended applications, we request that
            Intelsat amend its Schedule S forms to include this information as well.

        This request for additional information or clarification is made pursuant to Section
25.1 1l(a) of the Commission’s rules.” Intelsat must file its response with the Commission’s
Secretary within 15 days of the date of this letter, with a courtesy copy to Kal Krautkramer of my


 47 C.F.R. $ $ 25.1 14(c)(8) and 25.208(c). Alternatively, this angle-dependent pfd information may be
supplied in narrative form. See 47 C.F.R. $ 25.1 14(d)(5). Power flux density levels in the 17.7-17.8 GHz
band must be in accordance with the requirements of 47 C.F.R. $ 25.208(c).

’ Power flux density levels in the 17.3-17.7 GHz band must be in accordance with the requirements of 47
C.F.R. $ 25.208(w). Seealso 47 C.F.R. $ $ 25.1 14(d)(5).

‘These diagrams are provided in Exhibits 3C and 3F of the Technical Description of Intelsat’s amended
app I i cati on s .

’ This information is provided in Exhibit 8 of the amended applications.
     47 C.F.R. $ 9 25.1 14(c)(8) and 25.1 14(d)(5).
9
 Intelsat North America LLC, File Nos. SAT-AMD-20080 1 14-00008, SAT-AMD-20080 1 14-00009 SAT-
AMD-200801 14-00012, and SAT-AMD-200801 14-0001 1 at Exhibit 3L, pp 48-50.

lo   47 C.F.R. 9 25.1 14(c)(4)(ii).

I’   47 C.F.R. § 25.1 1 ](a).



                                                      2


staff, otherwise Intelsat’s applications may be dismissed. Amendments filed by Intelsat in
response to this request will be considered “minor” amendments and not subject to the filing
freeze for 17/24 GHz applications.” Please contact Kal Krautkramer at (202) 418-1335 if you
have any questions.


                                                  Sincerely,



                                                  Robert G. Nelson
                                                  Chief, Satellite Division
                                                  International Bureau




cc: Mr. Jose Albuquerque
    Senior Director, Spectrum Engineering, Intelsat Corporation




~~




’’See Public Notice, International Bureau Establishes Deadline for Amendments to Pending 17/24 GHz
BSS Applications, Report No. SPB-223, DA 0704895 (December 5,2007).



                                                  3



Document Created: 2008-06-05 14:53:21
Document Modified: 2008-06-05 14:53:21

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC