P7G-DS1

FCC ID

Equipment: WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth

Covidien llc. -DS1

15 Hampshire Street, Mansfield, MA 02048 United States

Application
Frequency Range
Final Action Date
Granted
OeA5Pd3xliomjU+87LB/hw==
2402.0-2480.0
2020-06-24
APPROVED
tW0taGGVw5YjvzSRebsFbQ==
5180.0-5240.0
2020-06-24
APPROVED
tW0taGGVw5YjvzSRebsFbQ==
5260.0-5320.0
2020-06-24
APPROVED
tW0taGGVw5YjvzSRebsFbQ==
5500.0-5700.0
2020-06-24
APPROVED
tW0taGGVw5YjvzSRebsFbQ==
5745.0-5825.0
2020-06-24
APPROVED
NayADR6y/5Bn98fHCwZ7zg==
2402.0-2480.0
2020-06-24
APPROVED
NayADR6y/5Bn98fHCwZ7zg==
2412.0-2472.0
2020-06-24
APPROVED
File NameDocument TypeDateDirect
Label InfoID Label/Location Info 2020-06-24 00:00:00 pdf
External PhotoExternal Photos 2020-06-24 00:00:00 pdf
Original Equipment Certification Holder LetterCover Letter(s) 2020-06-24 00:00:00 pdf
New Equipment Certification Holder LetterCover Letter(s) 2020-06-24 00:00:00 pdf
Authorisation LetterCover Letter(s) 2020-06-24 00:00:00 pdf

Application Details:

EquipmentWLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
FRN0029543063
Grantee CodeP7G
Product Code-DS1
Applicant BusinessCovidien llc.
Business Address15 Hampshire Street , Mansfield,Massachusetts United States 02048
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantBarbara Maestas – Program Manager, RF
Applicant Phone
Applicant Fax408-738-1741
Applicant Email[email protected]
Applicant MailStop
Test FirmUL Verification Services Inc. (formerly UL CCS)
Test Firm ContactMatthew Marotto
Test Firm Phone
Test Firm Fax000-000-0000
Test Firm Email[email protected]
Certified ByB Maestas –
Comment [NayADR6y/5Bn98fHCwZ7zg==]: Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Comment [OeA5Pd3xliomjU+87LB/hw==]: Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Comment [tW0taGGVw5YjvzSRebsFbQ==]: Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC