NZ3-WN0002

FCC ID

Equipment: Wi-Fi Router

Winstars Technology Limited -WN0002

Block 4, Taisong Industrial Park, Dalang Street, Longhua Town, Bao'an District,, Shenzhen, N/A N/A China

Application
Frequency Range
Final Action Date
Granted
IZVU5kB9WOpM5UdgbUYrIg==
5180.0-5240.0
2020-01-13
APPROVED
IZVU5kB9WOpM5UdgbUYrIg==
5745.0-5825.0
2020-01-13
APPROVED
cvaEifItMyW+TGmMZaVxfw==
2412.0-2462.0
2020-01-13
APPROVED
File NameDocument TypeDateDirect
User manualUsers Manual 2020-01-13 00:00:00 pdf
Test setupTest Setup Photos 2020-01-13 00:00:00 pdf
Test report part 2Test Report 2020-01-13 00:00:00 pdf
Test report part 1Test Report 2020-01-13 00:00:00 pdf
RF ExposureRF Exposure Info 2020-01-13 00:00:00 pdf
Internal photosInternal Photos 2020-01-13 00:00:00 pdf
LabelID Label/Location Info 2020-01-13 00:00:00 pdf
External photosExternal Photos 2020-01-13 00:00:00 pdf
Cover letterCover Letter(s) 2020-01-13 00:00:00 pdf
Operational DescriptionOperational Description N/A
SchematicsSchematics N/A
Software SecuritySDR Software/Security Inf N/A
Tune upParts List/Tune Up Info N/A
Block DiagramBlock Diagram N/A

Application Details:

EquipmentWi-Fi Router
FRN0021751953
Grantee CodeNZ3
Product Code-WN0002
Applicant BusinessWinstars Technology Limited
Business AddressBlock 4, Taisong Industrial Park, Dalang Street, Longhua Town, Bao'an District,, Shenzhen, China
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantJohnson Huang – General Manager
Applicant Phone 803
Applicant Fax86-755-83022207
Applicant Email[email protected]
Applicant MailStop
Test FirmShenzhen Huaxia Testing Technology Co., Ltd
Test Firm ContactAaron Ma
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByJohnson Huang – General Manager
Comment [cvaEifItMyW+TGmMZaVxfw==]: Power output listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Comment [IZVU5kB9WOpM5UdgbUYrIg==]: Power output listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC