BEJNT-14T90N

FCC ID

Equipment: WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card

LG Electronics USA NT-14T90N

1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 United States

Application
Frequency Range
Final Action Date
Granted
fu22y136MdkcqErcNmfl/g==
-
2019-10-02
APPROVED
xZLAbprrBgZu4uAB+OJPEQ==
2402.0-2480.0
2019-10-02
APPROVED
CaEjbNR05gZB3QaLbO0SaA==
5180.0-5250.0
2019-10-02
APPROVED
CaEjbNR05gZB3QaLbO0SaA==
5260.0-5320.0
2019-10-02
APPROVED
CaEjbNR05gZB3QaLbO0SaA==
5500.0-5720.0
2019-10-02
APPROVED
CaEjbNR05gZB3QaLbO0SaA==
5745.0-5825.0
2019-10-02
APPROVED
jYPMqpA5dn/tPAkM0LUIqg==
2402.0-2480.0
2019-10-02
APPROVED
jYPMqpA5dn/tPAkM0LUIqg==
2412.0-2472.0
2019-10-02
APPROVED
File NameDocument TypeDateDirect
Permisson Letter from originalCover Letter(s) 2019-10-02 00:00:00 pdf
POACover Letter(s) 2019-10-02 00:00:00 pdf
LabelID Label/Location Info 2019-10-02 00:00:00 pdf
confidentiality request letterCover Letter(s) 2019-10-02 00:00:00 pdf
Change in ID Cover LetterCover Letter(s) 2019-10-02 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-10-02 00:00:00 pdf
External PhotosExternal Photos 2020-03-30 00:00:00 N/A
User ManualUsers Manual 2020-03-30 00:00:00 N/A

Application Details:

EquipmentWLAN and BT, 2x2 PCIe M.2 1216 SD adapter card
FRN0020917688
Grantee CodeBEJ
Product CodeNT-14T90N
Applicant BusinessLG Electronics USA
Business Address1000 Sylvan Avenue , Englewood Cliffs,New Jersey United States 07632
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantKyung-Su Han – Director, Standards & Compliance
Applicant Phone
Applicant Fax201-816-2003
Applicant Email[email protected]
Applicant MailStop
Test FirmSporton International Inc.
Test Firm ContactAlex Chen
Test Firm Phone
Test Firm Fax+886-3-327-0978
Test Firm Email[email protected]
Certified ByLeo Huang – Manager
Comment [CaEjbNR05gZB3QaLbO0SaA==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [jYPMqpA5dn/tPAkM0LUIqg==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This transmitter has 20 and 40 MHz bandwidth modes.
Comment [xZLAbprrBgZu4uAB+OJPEQ==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC