BEJLGSBWAC94

FCC ID

Equipment: RF Module

LG Electronics USA LGSBWAC94

1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 United States

Application
Frequency Range
Final Action Date
Granted
HIHzMKpiv1kDzOujKieLhg==
2402.0-2480.0
2019-08-09
APPROVED
HIHzMKpiv1kDzOujKieLhg==
2412.0-2472.0
2019-08-09
APPROVED
KL7/9yvJtzHUyuR0VOqvBw==
2402.0-2480.0
2019-08-09
APPROVED
U9JGO0lRscOFxUGRn73dFQ==
5180.0-5240.0
2019-08-09
APPROVED
U9JGO0lRscOFxUGRn73dFQ==
5260.0-5320.0
2019-08-09
APPROVED
U9JGO0lRscOFxUGRn73dFQ==
5500.0-5720.0
2019-08-09
APPROVED
U9JGO0lRscOFxUGRn73dFQ==
5745.0-5825.0
2019-08-09
APPROVED
File NameDocument TypeDateDirect
MPE ReportTest Report 2019-08-09 00:00:00 pdf
Label and LocationID Label/Location Info 2019-08-09 00:00:00 pdf
DTS Test Report Part 2Test Report 2019-08-09 00:00:00 pdf
DTS Test Report Part 1Test Report 2019-08-09 00:00:00 pdf
BLE 5.0 Test Report Part 2Test Report 2019-08-09 00:00:00 pdf
BLE 5.0 Test Report Part 1Test Report 2019-08-09 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-08-09 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-08-09 00:00:00 pdf
Agent Authorization LetterCover Letter(s) 2019-08-09 00:00:00 pdf
BT Test Report Part 2Test Report 2019-08-09 00:00:00 pdf
BT Test Report Part 1Test Report 2019-08-09 00:00:00 pdf
Label LocationID Label/Location Info 2019-08-09 00:00:00 pdf
UNII Test Report Part 3Test Report 2019-08-09 00:00:00 pdf
UNII Test Report Part 2Test Report 2019-08-09 00:00:00 pdf
UNII Test Report Part 1Test Report 2019-08-09 00:00:00 pdf
DFS Test ReportTest Report 2019-08-09 00:00:00 pdf
Parts ListParts List/Tune Up Info N/A
SchematicsSchematics N/A
User ManualUsers Manual 2020-02-05 00:00:00 N/A
Block DiagramBlock Diagram N/A
External PhotosExternal Photos 2020-02-05 00:00:00 N/A
Internal PhotosInternal Photos 2020-02-05 00:00:00 N/A
Test Setup PhotosTest Setup Photos 2020-02-05 00:00:00 N/A
Operational DescriptionOperational Description N/A
UNII Software Security InfoSDR Software/Security Inf N/A

Application Details:

EquipmentRF Module
FRN0023476120
Grantee CodeBEJ
Product CodeLGSBWAC94
Applicant BusinessLG Electronics USA
Business Address1000 Sylvan Avenue , Englewood Cliffs,New Jersey United States 07632
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantKyung-Su Han – Director, Standards & Compliance
Applicant Phone
Applicant Fax201-816-2003
Applicant Email[email protected]
Applicant MailStop
Test FirmHCT Co., Ltd.
Test Firm ContactLee Yoon-Jung
Test Firm Phone
Test Firm Fax82-31-645-6401
Test Firm Email[email protected]
Certified ByDoYoung Kim – Assistant Manager
Comment [HIHzMKpiv1kDzOujKieLhg==]: Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20MHz and 40MHz channel bandwidth capabilities and a 2x2 MIMO configuration as described in this filing.
Comment [KL7/9yvJtzHUyuR0VOqvBw==]: Modular Approval. Power listed is the maximum Conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. OEM integrators and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Comment [U9JGO0lRscOFxUGRn73dFQ==]: Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device is installed with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20MHz, 40MHz and 80MHz channel bandwidth capabilities and a 2x2 MIMO configuration as described in this filing.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC