User Manual

FCC ID: 2AUCKPDWM91

Users Manual

Download: PDF
FCCID_4477954

7. Product Specifications DC Power: Microphone — 2 x AA 1.5V, Receiver — 1 x AA 1.5V (Alkaline] Transmission Power: 10 mW Max Wireless RF Frequency Audio frequency 60 Hz — 13 kiz Microphone response: Operating range: 5 metres mawith clear line ofsight 8. Product disposal instructions The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of ts working lfe The Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to encourage the recycling of products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increase of landil. neures When you have no further use for this product, please dispose of it using yourlocal authority‘s reeycling processes. For more information, please contact your local authority or the retailer where the product was purchased. User‘s Guide Please read this user‘s guide first before operating the microphone and save it for future reference. Congratulations on your purchase ofthis wireless microphone. To get the most from your purchase, please take a few minutes to read these instructions. 1. Safety instructions * This product should not be exposed to water by dripping or splashing and no objects filled with liquids, such as vases, should be placed near to the product. Do not place the unit on a wet surface. * Do not exposethe product to temperatures above 35°C and keep it out ofdirect sunlight. * This product has no user—serviceable parts. Do notattempt to repair this product yourself. Only qualified service personnel should perform servicing. * Do not subject the product to harsh impacts. Do not drop the product as this may result in damage. * Do not tap on the microphoneas that could cause damage to the microphone itself or any connected equipment. * This product is designed for indoor use only.

5. Operation 2. Preparation for use Unpack the microphone carefully. Before setting up the unit, verify that the following Receiver Connection accessories are present: Move the power switch to the ‘On‘ position and plug the 6.35mm plug into the microphone input of the karaoke player. + 1 x Wireless Microphone * 1 x Wireless Receiver with 6.35mm plug Wireless Microphone Move the power switch to the ‘On‘ position and sing along. To takea break between 3. Power source performances the microphone can be switched to the ‘Mute‘ position but that will still use Please insert alkaline batteries (not supplied) into both the wireless microphone and receiver some battery power. before use. Microphone: 2 x AA, Receiver: 1 x AA. Switching Off Make sure both power switches on the receiver and microphone are set to the ‘Off position in order to save battery power. Do not leave the microphone switch in the ‘Mute‘ position as 4. Location of controls and indicators that will waste battery power. If the product is not to be used for an extended period, then remove batteries from both parts in order to avoid damage by battery leakage. 6. Troubleshooting and Support If a problem occurs please check the following table before returning the unit.If the problem cannot be solved with the following information then please return the item to the store where it was purchased from. Problem Remedy | Audio Problems — Make sure the power switches of both microphoneand No sound from karaoke. receiver are set to the ‘On‘ position. — Make sure the karaokeis switched on and the receiver is plugged into the karaoke. — Make sure the microphone switch is not set to ‘Mute‘ — Make sure the karaoke volume is not turned down. — Make sure the karaoke microphone volume is not turned down. — This can be caused by electrical interference from Slight buzzing or Auorescent lights, dimmer switches, mains power wiring or humming sounds heard. oter electrical equipment.If this happens then please move to a different location until the interference sound is reduced. Power Issues — Make sure the power switches of both microphone and LED on microphone or receiver are set to the ‘On‘ position. 1 ~ Microphone On/Oft/Mute Switch 4 — Receiver Power LED recelver does not light. — Check the batteries are not exhausted and replace if Use to switchthe microphone On/Off. Lights red when receiver is switched on needed. Use to mute the microphone during use. 2 — Microphone Power LED 5 — Receiver 6.35mm Plug Lights red when microphoneis on or muted. Plug the receiverinto the Karaoke microphoneinput using the 6.35mm plug 3 — Receiver On/Off Switch 6 — Receiver Antenna Use to switch the receiver on or off. Unravel fully for best reception.

FCC warning statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device operates on a no‐protection, no‐interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC‐2‐1‐28, Voluntary Licensing of License‐Exempt Low‐Power Radio Apparatus in the TV Bands.


Document Created: 2019-09-23 09:47:51
Document Modified: 2019-09-23 09:47:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC