2ATKS-1269HC

FCC ID

Equipment: Sub GHz FSK/OOK Transceiver Module

LJ ELECTRONICS TECHNOLOGY LIMITED -1269HC

Suite 1003,10/F.,Chung Sheung Building, 9 Queen Victoria Street,Centra,HONG KONG, HONG KONG, N/A N/A China

Application
Frequency Range
Final Action Date
Granted
c+KIa9oNKVV98I8ibfUPrw==
902.0-928.0
2019-07-11
APPROVED
File NameDocument TypeDateDirect
Request for ConfidentialityCover Letter(s) 2019-07-11 00:00:00 pdf
Modular Transmitter ApplicationCover Letter(s) 2019-07-11 00:00:00 pdf
Label_and_LocationID Label/Location Info 2019-07-11 00:00:00 pdf
DDT-R19050916-1E1 LJ1269HC-915 FCC ID ReportTest Report 2019-07-11 00:00:00 pdf
Agent_Authorization_Rev_1.0Cover Letter(s) 2019-07-11 00:00:00 pdf
SchematicsSchematics N/A
Test SetupTest Setup Photos 2020-01-08 00:00:00 N/A
User_ManualUsers Manual 2020-01-08 00:00:00 N/A
Block_DiagramBlock Diagram N/A
External_PhotosExternal Photos 2020-01-08 00:00:00 N/A
Internal_PhotosInternal Photos 2020-01-08 00:00:00 N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentSub GHz FSK/OOK Transceiver Module
FRN0028543874
Grantee Code2ATKS
Product Code-1269HC
Applicant BusinessLJ ELECTRONICS TECHNOLOGY LIMITED
Business AddressSuite 1003,10/F.,Chung Sheung Building, 9 Queen Victoria Street,Centra,HONG KONG, HONG KONG,N/A China
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]mlabs.com
ApplicantHans Hu –
Applicant Phone
Applicant Fax0769-81096306
Applicant Email[email protected]
Applicant MailStop
Test FirmDongguan Dongdian Testing Service Co., Ltd.
Test Firm ContactMr. Jamy Yu
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByLEO LIU –
Comment [c+KIa9oNKVV98I8ibfUPrw==]: Limited Modular Approval. This device is approved with dedicated antenna, antenna gain is less than 1.2dBi, the use of a standard antenna jack or electrical connector is prohibited. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna [those antennas]3 tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC