User Manual

FCC ID: 2ASTH-X2

Users Manual

Download: PDF









Main Bogy ormX908
imormetammes ____~
prvasnwtow _7 .
mur-wlm/




              retime



comseare on


















                Correctly dispose of this product. This marking
  indicates that this product should not be disposed with other
  household wastes throughout the EU.
    To prevent possible harm to the environment or human health

from uncontrolled waste disposal, recycle responsibly to promote
the sustainable reuse of material resources.
To safely recycle your device, please use return and collection systems
or contact the retailer where the device was originally purchased.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.


Important safety information
Read all the safety information below before using your device.
Using unauthorized cables, power adapters, or batteries can cause fire,
explosion, or pose other risks.
Use only authorized accessories which are compatible with your device.
This device’s operating temperature range is 0℃~ 40℃. Using this
device in the environments outside of this temperature range may
damage the device.
If your device is provided with a built-in battery, don’t attempt to replace
the battery yourself to avoid damaging the battery or the device. Charge
this device only with the included or authorized cable and power adapter.
Using other adapters may cause fire, electric shock, and damage the
device and the adapter.
After charging is complete, disconnect the adapter from both the device
and the power outlet. Do not charge the device longer than 12 hours. The
battery must be recycled or disposed of separately from household waste.
Mishandling the battery may cause fire or explosion. Dispose or recycle
the device, its battery and accessories
according to the local regulations.
Do not disassemble, hit, crush, or burn the battery. In case of
deformation, stop using the battery immediately.
 - Do not short circuit the battery to avoid overheating, burns, or other
personal injuries.
 - Do not place the battery in the high-temperature environments.
Overheating may cause explosion.
 - Do not disassemble, hit, or crush the battery to avoid battery leaks,
overheating, or explosion.
 - Do not burn the battery to avoid fire or explosion.
 - In case of deformation, stop using the battery immediately.
Keep your device dry.
Do not try to repair the device yourself. If any part of the device does not
work properly, contact customer support or bring your device to an
authorized repair center.
Connect other devices according to their instruction manuals. Do not
connect incompatible devices to this device.
For AC/DC Adapter, the socket-outlet shall be installed near the
equipment and shall be easily accessible.


         Safety precautions
Follow relevant laws and regulations. Do not use your XPOS in the
following environments.
Do not use your XPOS in a potentially explosive environments include
fuelling areas, below decks on boats, fuel or chemical transfer or storage
facilities, areas where the air contains chemicals or particles, such as
grain, dust, or metal powders. Obey all posted signs to turn off wireless
devices such as your XPOS or other radio equipment.
Do not use your XPOS in the hospital operating rooms, emergency
rooms, or intensive care units.Please consult your doctor and the device
manufacturer to determine if operation of your XPOS may interfere with
the operation of your medical device.To avoid potential interference with
the pacemaker.keep a minimum separation of 15 cm be maintained
between the mobile XPOS and the pacemaker . To achieve this use the
XPOS on the opposite ear to your pacemaker and do not carry it in a
breast pocket.Do not use your XPOS near hearing aids, cochlear
implants, etc to avoid interference with medical equipment.
Respect aircraft safety regulations and turn off your XPOS on board the
aircraft when required.
When driving a vehicle, use your XPOS in accordance with the relevant
traffic laws and regulations.
To avoid lightning strike, do not use your XPOS outdoors during
thunderstorms.
Do not use your XPOS to make calls while it is charging.
Do not use your XPOS in places with high humidity such as bathrooms.
Doing so may result in electric shock, injury, fire, and charger damage.
Observe any rules which restrict using mobile XPOS in specific cases
and environments.




Security notice
Update your phone’s operating system using the built-in software
update feature, or visit our authorized service outlets. Updating
software through other means may damage the device or result in data
loss, security issues, and other risks.


Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.


RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy. The
exposure standard for wireless device employs a unit of measurement
known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/Kg. For body worn operation,
this device has been tested and meets the FCC RF exposure
guidelines for use with an accessory that contains no metal and be
positioned a minimum of 0 cm from the body. Use of other
accessories may not ensure compliance with FCC RF exposure
guidelines. If you do not use a body-worn accessory and are not
holding the device at the ear, position the handset a minimum of 1.0
cm from your body when the device is switched on.

FCC Note
 Changes or modifications not expressly approved by the party
 responsible for compliance could void the user’s authority to
 operate the equipment. Shielded cables must be used with this
 unit to ensure compliance with the Class B FCC limits.

5GHz devices only
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz
bands. These radar stations can cause interference with and/or damage this device. No
configuration controls are provided for this wireless equipment allowing any change in the
frequency of operations outside the FCC grant of authorization for US operation according to Part
15.407 of the FCC rules.


IC statement
This device complies with RSS247 of Industry Canada. Cet appareil se
conforme à RSS247 de Canada d'Industrie. This device complies with
Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may
cause undesired operation of the device. appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif
ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit
accepter tout brouillage recu, y compris un brouillage susceptible de
provoquer un fonctionnement indesirable.

Notice for 5 GHz devices
Caution:
 (i) the device for operation in the band 5150 - 5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel mobile
satellite systems; (ii) the maximum antenna gain permitted for devices in the
bands 5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the e.i.r.p.
limit: and
(iii) the maximum antenna gain permitted for devices in the band 5725 -
5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point
and non point-to-point operation as appropriate.
 (iv) Users should also be advised that high-power radars are allocated as
primary users (i.e. priority users) of the bands 5250 - 5350 MHz and 5650 -
5850 MHz and that these radars could cause interference and/or damage to
LE-LAN devices.

Exposure of humans to RF fields (RSS-102)
The computers employ low gain integral antennas that do not emit RF field
in excess of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada's Web site at http://www.hc-
sc.gc.ca/

The radiated energy from the antennas connected to the wireless adapters
conforms to the IC limit of the RF exposure requirement regarding IC
RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended
operating positions accepted by the FCC/ RSS with the device transmitting
at its highest certified power level in all tested frequency band without
distance attaching away from the body. Non-compliance with the above
restrictions may result in violation of FCC RF exposure guidelines.

Conformité des appareils de radiocommunication aux limites d'exposition
humaine aux radiofréquences (CNR-102)
 L'ordinateur utilise des antennes intégrales à faible gain qui n'émettent
pas un champ électromagnétique supérieur aux normes imposées par
Santé Canada pour la population. Consultez le Code de sécurité 6 sur le
site Internet de Santé Canada à l'adresse suivante : http://www.hc-
sc.gc.ca/ L'énergie émise par les antennes reliées aux cartes sans fil
respecte la limite d'exposition aux radiofréquences telle que définie par
Industrie Canada dans la clause 4.1 du document CNR-102, version 5. Tests
DAS sont effectués en utilisant les positions recommandées par la FCC/
CNR avec le téléphone émet à la puissance certifiée maximale dans
toutes les bandes de fréquences testées sans distance attacher loin du
corps. Non-respect des restrictions ci-dessus peut entraîner une violation
des directives de la FCC/CNR.


FCC Regulations
This mobile phone complies with part 15 of the FCC Rules.
Operation is
subject to the following two conditions: (1) This device may not
cause
harmful interference, and (2) this device must accept any
interference
received, including anterference that may cause undesired operation.
This mobile phone has been tested and found to comply with the
limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiated radio frequency
energy
and, if not installed and used in accordance with the instructions,
may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation If this equipment does cause harmful
interference
to radio or television reception, which can be determined by turning
the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:



Document Created: 2019-05-13 08:32:58
Document Modified: 2019-05-13 08:32:58

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC