Limited single-modular approval explanation

FCC ID: 2ASPHLXNAVAM

Cover Letter(s)

Download: PDF

                                                                                         KIDRIEEVA ULICA 24, 3000 CELUE, SLOVENUA
                                                                                                            TEL:+ 386 59233400
                    (®                                                                                      FAX:+ 386 59933522
                                                                                                                INFO@LxNAV.com



    March 15, 2019

    MET Laboratories, Inc.
    914 West Patapsco Avenue
    Baltimore, MD 21230

    RE: LIMITED SINGLE—MODULAR APPROVAL EXPLANATION FOR "LXNAV Application
    module" with FCC ID 2ASPHLXNAVAM
    To Whom It May Concern:

    This letter serves as an explanation for single—modular approval for LXNAV Application
    module.
    The module does not meet »TRANSMITTER MODULE EQUIPMENT AUTHORIZATION
    GUIDE« Section III.a.2 and Section III.a.3. It does not contain any buffers for digital (UART,
    12C, USB, SPI) signals. Moreover, it does not contain any local voltage regulation on—board. It
    is the role of the host to provide adequate voltage and power to the module. However, this
    module will be only used in LXNAV designed and approved host devices. The radio elements
    on the module will always be shielded. The antenna connector on the modules is a U.FL type
    connector and the module will always be connected to the LXNAV 915MHz dipole antenna via
    a U.FL to RP—SMA cable. Below, is an explanation of the compliancy or deviation from Section
    Ill.a 1 to 8:
         —    Ill.a.1: Radio elements on the LXNAV Application module are always shielded.
         —     Ill.a.2: The module does not have buffered data inputs
         —     Ill.a.3: The module does not have power supply regulation present
         —     Ill.a.4; The module contains a U.FL type antenna connector
         —      Illl.a.5: The module is compliant in stand—alone configuration as presented by the
               sample sent to SiQ d.o.0., which incorporates a minimum host configuration for
               operation
         —     Ill.a.6: As per the included pictures, the module is labeled with a permanently affixed
               FCC label
         —     llla.7: The module complies with all specific rules applicable to the transmitter. Refer
               to SiQ test report T251—0243/19
          —    llL.a.8: The module complies with RF exposure requirements. Refer to SiQ test report
               T251—0243/19

    LXNAV will not sell the LXNAV Application module to a third—party company, thus further
    ensuring appropriate use of the module.


    Thank you for your attention.



    Sincerely,   /(AM
    Erazem Pglutnik
    CEO




LXNAV RAzvOJ, PROIZVODNJA, ZASTOPANIE D.0.0. + KIDRICEVA ULICA 24 + 3000 Ceue « Sepe¥%: CEUg + DAVENA $teviLka: S125779095 + Maticna Stevilka: 3637565



Document Created: 2019-06-11 20:35:53
Document Modified: 2019-06-11 20:35:53

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC