Test Report

FCC ID: 2ASDRIT728

Test Report

Download: PDF

I7]
                                                                                                Model: 11728




                                        FCC Part 15C
                    Measurement and Test Report
                                                     For

                 Shenzhen jianfeng electronic pet product Co.,ltd.

    6F, Building 4, Weipeng Garden, Zhenzhong Road, Huagiang North Street,

                                       Futian District, Shenzhen



                                       FCC ID: 2ASDRIT728


  FCC Rule(s):                              ECC Part 15.231
  Product Description:                      Dog shock collar

  Tested Model:                             (1728

  Report No.:                               STR181180811

  Sample Receipt Date:                      2018—11—06

  Tested Date:                              2018—11—07 to 2019—01—08

  Issued Date:                              2019—01—08


  Tested By:                                Mike Shi / Engineer             nake Shi
                                                                                 —Chin
  Reviewed By:                              Silin Ghen / EMC Manager         *      "   9

  Approved & Authorized By:                 Jandy So / PSQ Manager          J”’(ZW

  Prepared By:
                              Shenzhen SEM Test Technology Co., Ltd.
                             1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road,
                             Bac‘an District, Shenzhen, P.R.C. (518101)
            Tel.: +86—755—33663808       Fax.: +86—755—33608309    Website: www.semfest.com.cn


    Note: This test report is limited to the above client company and the product model only. It
    may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ld.


Report No.: STRIS1 1806 IT                          Page I of 20                            RF Part 15.23la


                                                                                                                                                           Model: iT728


TABLE OF CONTENTS
1. GENERAL INFORMATION ...................................................................................................................................3
   1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...............................................................................3
   1.2 TEST STANDARDS...................................................................................................................................................4
   1.3 TEST METHODOLOGY .............................................................................................................................................4
   1.4 TEST FACILITY .......................................................................................................................................................4
   1.5 EUT SETUP AND TEST MODE .................................................................................................................................5
   1.6 MEASUREMENT UNCERTAINTY ..............................................................................................................................5
   1.7 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................6
2. SUMMARY OF TEST RESULTS ...........................................................................................................................7
3. ANTENNA REQUIREMENT ..................................................................................................................................8
   3.1 STANDARD APPLICABLE.........................................................................................................................................8
   3.2 TEST RESULT..........................................................................................................................................................8
4. RADIATED EMISSIONS .........................................................................................................................................9
   4.1 STANDARD APPLICABLE.........................................................................................................................................9
   4.2 TEST PROCEDURE .................................................................................................................................................10
   4.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................11
   4.4 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................11
5. 20DB BANDWIDTH ...............................................................................................................................................14
   5.1 STANDARD APPLICABLE.......................................................................................................................................14
   5.1 TEST PROCEDURE .................................................................................................................................................14
   5.2 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................14
6. TRANSMISSION TIME .........................................................................................................................................15
   6.1 STANDARD APPLICABLE.......................................................................................................................................15
   6.2 TEST PROCEDURE .................................................................................................................................................15
   6.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................15
7. DUTY CYCLE .........................................................................................................................................................16
   7.1 STANDARD APPLICABLE.......................................................................................................................................16
   7.2 TEST PROCEDURE .................................................................................................................................................16
   7.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................16
8. CONDUCTED EMISSIONS ..................................................................................................................................18
   8.1 TEST PROCEDURE .................................................................................................................................................18
   8.2 BASIC TEST SETUP BLOCK DIAGRAM...................................................................................................................18
   8.3 TEST RECEIVER SETUP .........................................................................................................................................18
   8.4 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................18




Report No.: STR18118061I                                                          Page 2 of 20                                                      RF Part 15.231a


                                                                                                      Model: iT728


1. GENERAL INFORMATION

1.1 Product Description for Equipment Under Test (EUT)

Client Information
Applicant:                                 Shenzhen jianfeng electronic pet product Co.,ltd.
Address of applicant:                      6F, Building 4, Weipeng Garden, Zhenzhong Road, Huaqiang
                                           North Street, Futian District, Shenzhen

Manufacturer:                              Shenzhen jianfeng electronic pet product Co.,ltd.
Address of manufacturer:                   6F, Building 4, Weipeng Garden, Zhenzhong Road, Huaqiang
                                           North Street, Futian District, Shenzhen

General Description of EUT
Product Name:                              Dog shock collar
Trade Name:                                /
Model No.:                                 iT728
                                           iT828, iT81N, iT998N, iT498, iT798, iT919, iT929, iT368,
                                           iT998D, iT998DR, iT998DB, iT613, iT86, iT154, iT023, iT025,
                                           iT026, iT168, iT165, iT853, iT852, iT162, iT163, iT166, iT169,
Adding Model(s):                           iT118, iT128, iT138, iT158, iT178, iT188, iT318, iT328, iT628,
                                           iT638, iT668, iT688, iT988, iT898, iT838, iT868, iT878, iT928,
                                           iT938, iT968, iT978, iT999, CSB19, CSB12, CSB10, M1260,
                                           M2048, M3016
Rated Voltage:                             DC3.7V by Battery
Battery Capacity:                          500mAh
                                           MODEL:XS-0500300U
Power Adaptor :
                                           INPUT:AC100-240~ 50/60Hz 0.3A               OUTPUT:DC5V,300mA

Note: The test data is gathered from a production sample provided by the manufacturer. The appearance of others
models listed in the report is different from main-test model iT728, but the circuit and the electronic construction
do not change, declared by the manufacturer.


Technical Characteristics of EUT
Frequency Range:                           433.92 MHz
Max. Field Strength:                       77.93dBuV/m
Modulation:                                ASK
Antenna Type:                              Integral Antenna
Antenna Gain:                              0dBi




Report No.: STR18118061I                              Page 3 of 20                               RF Part 15.231a


                                                                                                  Model: iT728



1.2 Test Standards
The tests were performed according to following standards:

FCC Rules Part 15.231: Periodic operation in the band 40.66-40.70 MHz and above 70 MHz.
ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices

Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which
result in lowering the emission/immunity, should be checked to ensure compliance has been maintained.

1.3 Test Methodology

All measurements contained in this report were conducted with ANSI C63.10-2013,
The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes
were adapted accordingly in reference to the Operating Instructions.

1.4 Test Facility

FCC – Registration No.: 125990
Shenzhen SEM Test Technology Co., Ltd. Laboratory has been recognized to perform compliance testing on
equipment subject to the Commissions Declaration Of Conformity (DOC). The Designation Number is CN5010,
and Test Firm Registration Number is 125990.


Industry Canada (IC) Registration No.: 11464A
The 3m Semi-anechoic chamber of Shenzhen SEM Test Technology Co., Ltd. has been registered by Certification
and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A.




Report No.: STR18118061I                            Page 4 of 20                              RF Part 15.231a


                                                                                             Mosas ctrze

1.5 EUT Setup and Test Mode
"The EUT was aperaled atcontinuous brainsmiting mode hat was for the pupose ofthe messurements. Alltesting
shallbe performed uner maximum oulpat pover condiion, and to measure ts highest possble emissons level,
rmoredetaded description as ollows:

Test Mode Lt
  TesiMoce                   Deseription                                   Remurk
     To                     Transniting                                  asssouine
"Test Conditions
                    Tempersie
                   Relsive huriciy
                    ATiM Proswe
ET Cable List and Details
    Cable Deseripton                 Length (m)        ShieldedUnstieided         Witn / WihoutFevite
       bccaste                           to                Unshielded                 Wihout Cre
Special Cable isand Details
    Cable Deseripton                 Length (m)        ShieldedUnstieided         Watn / WihoutFerite
            7                             7                     7                           7

Auiliary Equipment Listand Details
       bescripion             Manufactrer                    Model                   Serial Number
            7                      7                           7                            7
1.6 Measurement Uncertainty
Measurement unceriainty
               Parsmater                                Cooditions                    Uncersiny
          Occupied Bendwidih                            Conducied                       sise
      Condicied Sporius Emssion                         Congucea                       zues
           Transrission Time                            Conducied                       ism
                                                                                   s—50ie 457ean
          Conducked Emisions                            Conducted
                                                                                 ons ons 43309
                                                                                 3o—zooviie +45za0
                                                                                  02—i0he +s sean
       Transmiter Spurious Emissions                     Radined                   Logks 43309
                                                                                  6—l#Gtte 439008




ReyonNo: smrtetavent                              Pazsorm                                TF Parsain


                                                                                              Model: iT728



1.7 Test Equipment List and Details

   No.        Description    Manufacturer           Model             Serial No.   Cal Date     Due Date
               Spectrum
SEMT-1072                       Agilent            E4407B            MY41440400    2018-05-22 2019-05-21
               Analyzer
               Spectrum        Rohde &
SEMT-1031                                           FSP30            836079/035    2018-05-22 2019-05-21
                Analyzer       Schwarz
               EMI Test        Rohde &
SEMT-1007                                           ESVB             825471/005    2018-05-22 2019-05-21
                Receiver       Schwarz
SEMT-1008      Amplifier        Agilent             8447F            3113A06717    2018-05-22 2019-05-21
SEMT-1043      Amplifier        C&D               PAP-1G18              2002       2018-05-22 2019-05-21
               Broadband
SEMT-1011                    Schwarz beck         VULB9163            9163-333     2017-06-08 2020-06-07
                Antenna
SEMT-1042    Horn Antenna        ETS                 3117             00086197     2017-06-08 2020-06-07
SEMT-1069    Loop Antenna    Schwarz beck         FMZB 1516             9773       2017-06-08 2020-06-07
               EMI Test        Rohde &
SEMT-1001                                            ESPI              101611      2018-05-22 2019-05-21
                Receiver       Schwarz
SEMT-1003       L.I.S.N      Schwarz beck         NSLK8126            8126-224     2018-05-22 2019-05-21
SEMT-1166    Power Limiter      Agilent            N9356B            MY45450376    2018-05-22 2019-05-21
SEMT-1048      RF Limiter      ATTEN          AT-BSF-2400~2500            /        2018-05-22 2019-05-21
SEMT-1076     RF Switcher    Top Precision        RCS03-A2                /        2018-05-22 2019-05-21
SEMT-C001        Cable         Zheng DI      LL142-07-07-10M(A)           /        2018-03-19 2019-03-18
SEMT-C002        Cable         Zheng DI      ZT40-2.92J-2.92J-6M          /        2018-03-19 2019-03-18
SEMT-C003        Cable         Zheng DI      ZT40-2.92J-2.92J-2.5M        /        2018-03-19 2019-03-18
SEMT-C004        Cable         Zheng DI            2M0RFC                 /        2018-03-19 2019-03-18
SEMT-C005        Cable         Zheng DI            1M0RFC                 /        2018-03-19 2019-03-18
SEMT-C006        Cable         Zheng DI            1M0RFC                 /        2018-03-19 2019-03-18




Report No.: STR18118061I                         Page 6 of 20                           RF Part 15.231a


                                                         Mosas ctrze

2. SUMMARY OF TEST RESULTS


       FCC Rutes          Description of Tst Hem         Restt
        $ 1520             Anterns Requirement         Conplian.
        315205          Resticted Band of Operation    Conplian.
        $ 15 200        Reinted prious Emsions         Conplian.
       mszim                Deaclivation Tesing        Conplian.
       nsm                  Rednied Emisions           Conplian.
       msaio              2odB Berdwviith Tesing       Conplian.
       Essom                Contccied Eniion           Congiian.




ReyonNo: smrtetavent         Pazrorm                  TF Parsain


                                                                                                      Model: iT728


3. Antenna Requirement

3.1 Standard Applicable

According to FCC Part 15.203, an intentional radiator shall be designed to ensure that no antenna other than that
furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of
an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the
provisions of this section.

3.2 Test Result

This product has an Integral antenna, fulfill the requirement of this section.




Report No.: STR18118061I                               Page 8 of 20                              RF Part 15.231a


                                                                                                   Model: iT728


4. Radiated Emissions

4.1 Standard Applicable

According to §15.231(b), the field strength of emissions from intentional radiators operated under this section
shall not exceed the following:




The limits on the field strength of the spurious emissions in the above table are based on the fundamental
frequency of the intentional radiator. Spurious emissions shall be attenuated to the average (or, alternatively,
CISPR quasi-peak) limits shown in this table or to the general limits shown in §15.209, whichever limit permits a
higher field strength.

The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The
provisions in §15.35 for limiting peak emissions apply. Spurious Radiated Emissions measurements starting
below or at the lowest crystal frequency.

Compliance with the provisions of §15.205 shall be demonstrated using the measurement instrumentation
specified in that section.




Report No.: STR18118061I                             Page 9 of 20                              RF Part 15.231a


                                                                                            Model: iT728

4.2 Test Procedure

The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was
with the FCC Part 15.205 15.231(b) and FCC Part 15.209 Limit.




                                                       Antenna
                                                        Tower
                                                                   1m-4m




                                   3m

          EUT SYS
                            1.5m




          Turntable
           Table                                                              To EMI Receiver



                                        Ground Plane




Report No.: STR18118061I                           Page 10 of 20                         RF Part 15.231a


                                                                                                     Model: iT728

4.3 Corrected Amplitude & Margin Calculation

The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the
Amplifier Gain from the Amplitude reading. The basic equation is as follows:

                      Corr. Ampl. = Indicated Reading +Ant.Loss +Cab. Loss – Ampl.Gain

The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit.
For example, a margin of -6dBV means the emission is 6dBV below the maximum limit. The equation for
margin calculation is as follows:
                                  Margin = Corr. Ampl. – FCC Part 15C Limit

4.4 Summary of Test Results/Plots

Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported.




Report No.: STR18118061I                             Page 11 of 20                              RF Part 15.231a


                                                                                                                  Madel: 1728


           Test Mode                              Thl                          Polarity:                    Horizontal


$0.0       abw/n
                                                                                                            tm        —
so
70
so
so
w
ao
2o
10
o
a                 :      .           1__                               :              .        :     1O L 1
        anoo      «0     so      sn 7o° oo                                            soo      «o0   soo 600700 10000 wite

No.        Frequency          Reading    Corm      Dutyeyde      |_Result       Limit       Margin   Deg.   Height    Remark
             vine             dBu¥/m    Factor(     Factor      dBu¥im         dBu¥/         @B)     (*)     (cm)
                                          an)        @s)
    1          433.92          8447     —5.99           NA       7748          100.82       —23.34   320      100        peak
               433.92            7        7          840          69.08        80.82        —11.74   117      100        Ave
    2          857.84          622       0.42           NA        62.62        80.82        182       ss      100        peak
               857.84            7        7          840          5422         60.82         —5.6    296      100        Ave


Above 1GHe
No.        Frequency       Reading       Corr:     Dutyeycle     Result         Limit       Margin   Deg.   Height Remark
             mne          dBu¥/m        Factor       Factor     dBu¥im         dBu¥/m         dB     C)      «n
                                         (an)         (an)
    1          1301.76         223L     2595          NA          5284           74         20l6     |_45     100        Pesk
               130176            7         7          s40         asaa           5e         ase      321      |_100      Ave
    2          1735.68         2e       2.m           NA          5007           74         2a9s     231      |_100      Pesk
               17a5.68           7         7          440         4167           54         423       32      100        Ave




Report No.: STRI31 180611                                      Page 12 of 20                                 RF Par 15.231a


                                                                                                              Madel: 1728


             Test Mode                         Thl                          Polarity:                    Vertical


$0.0      abw/n

so
70
so
so
an
ao
zo
10
o
a°              .        L1                                        :               .       .      L1
     suoon      4n       s ca To on                                                Soo     oo     soocon 700 10000 wite

    No.      Frequency    Reading    Cort       Dutyerde      Result         Limit       Margin   Deg.   Height     Remark
               mine       dBu¥im    Factor(|      Factor     dBuvim         dBuv/m        @B)     |(*)    (<m)
                                      am)         (an)
     1        433.92       84.92    5.99             NA       7793          100.82       —22.89    218    100        peak
              433.92         7         7          840          69.53        80.82        —11,29    161    100        Ave
     2        857.84       64.7      0.42            NA        65.12        80.82        4157      103    100        peak
              857.84         7         7          840          5672         60.82        —4.10     o      100        Ave


Above 1GHz
    No.      Frequency    Reading    Corr:      Dutyercle     Result         Limit       Margin   Dey.   Height Remark
               mhz        dBu¥im    Factor       Factor      dBu¥im         dBu¥/m        as       C)     (em)
                                     (an)         (an)
     1        1301.76      2865     2605          NiA           556           74         s4         o5    100        Peak
              130176         /         /          s40           472           se          ss       315    |_100      Ave
     2        mss          2ass     2777          Nia          5732           74         168       251    |_100      Peak
              173568         /         /          s40          as.02          se         sos        35    100        Ave

Note: Testing is carried out with frequency rang 3OMHz to the tenth harmonics, which above 4" Harmonics are
attenuated more than 204B below the permissible limits or thefield strength is too small to be measured.
      The fundamental frequency is 433.92MHz, so the fundamental and spurious emissions radiated limit base
on the the operatingfrequency 433.92MHz



Report No.: STRI31 180611                                   Page 13 of 20                                 RF Par 15.231a


                                                                                              Model: iT728


5. 20dB Bandwidth

5.1 Standard Applicable

According to FCC Part 15.231(c), The bandwidth of the emission shall be no wider than 0.25% of the center
frequency for devices operating above 70 MHz and below 900 MHz. Bandwidth is determined at the points 20 dB
down from the modulated carrier.

5.1 Test Procedure

With the EUT’s antenna attached, the EUT’s 20dB Bandwidth power was received by the test antenna, which was
connected to the spectrum analyzer with the START, and STOP frequencies set to the EUT’s operation band.


5.2 Summary of Test Results/Plots

     Test Frequency                   20dB Bandwidth                   Limit
                                                                                           Result
          MHz                              kHz                         kHz
         433.92                    580.650                  1084.8                          Pass
Limit = Fundamental Frequency X 0.25% = 433.92 MHz X 0.25% = 1084 kHz

Please refer to the attached plots.




        433.92MHz




Report No.: STR18118061I                               Page 14 of 20                       RF Part 15.231a


                                                                                                      Model: iT728


6. Transmission Time

6.1 Standard Applicable

According to FCC Part 15.231 (a), the transmitter shall be complied the following requirements:

1) A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within
not more than 5 seconds of being released.
(2) A transmitter activated automatically shall cease transmission within 5 seconds after activation.
(3) Periodic transmissions at regular predetermined intervals are not permitted. However, polling or supervision
transmissions, including data, to determine system integrity of transmitters used in security or safety applications
are allowed if the total duration of transmissions does not exceed more than two seconds per hour for each
transmitter. There is no limit on the number of individual transmissions, provided the total transmission time does
not exceed two seconds per hour.

6.2 Test Procedure

With the EUT’s antenna attached, the EUT’s output signal was received by the test antenna, which was connected
to the spectrum analyzer. Set the center frequency to 433.92MHz, than set the spectrum analyzer to Zero Span for
the release time reading. During the testing, the switch was released then the EUT automatically deactivated.

6.3 Summary of Test Results/Plots

 Transmission Type        Test Frequency(MHz)        Transmission Time(s)            Limit(s)            Result
      Manually                        433.92                  0.33                       5                 Pass


Please refer to the attached plots.




        433.92MHz




Report No.: STR18118061I                              Page 15 of 20                                RF Part 15.231a


                                                                                                  Model: iT728


7. Duty Cycle

7.1 Standard Applicable

According to FCC Part 15.231 (b)(2) and 15.35 (c), For pulse operation transmitter, the averaging pulsed
emissions are calculated by peak value of measured emission plus duty cycle factor.

7.2 Test Procedure

With the EUT’s antenna attached, the EUT’s output signal was received by the test antenna, which was connected
to the spectrum analyzer. Set the center frequency to 433.92MHz, than set the spectrum analyzer to Zero Span for
the release time reading. During the testing, the switch was released then the EUT automatically deactivated.

7.3 Summary of Test Results/Plots

433.93MHz:
                           Width of Pulse                               Transmission Time   Total Time (Ton)
    Type of Pulse                                 Quantity of Pulse
                               (ms)                                           (ms)                (ms)
    Pulse 1 (Wide)               0.78                    10                    7.80
                                                                                                  13.96
   Pulse 2 (Narrow)              0.28                    22                    6.16


      Test Period (Tp)              Total Time (Ton)              Duty Cycle            Duty Cycle Factor
             ms                            ms                           %                       dB
            36.70                         13.96                        38.04                   -8.40
Remark: Duty Cycle Factor=20*log(Duty Cycle)

Please refer to the attached test plots




Report No.: STR18118061I                               Page 16 of 20                           RF Part 15.231a


                                              Model: iT728



433.92MHz




       Test Period




      Pulse Number




   Pulse 1 and Pulse 2




Report No.: STR18118061I   Page 17 of 20   RF Part 15.231a


                                                                                                             Model: iT728


8. Conducted Emissions

8.1 Test Procedure

The setup of EUT is according with per ANSI C63.10:2013 measurement procedure. The specification used was
with the FCC Part 15.207 Limit.
The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle.
The spacing between the peripherals was 10 cm.

8.2 Basic Test Setup Block Diagram




                                              Adapter                     EUT



     LISN




                                                                                                               1.0 m
                                                           1.5
 To Receiver                  Non-conduction table
                              80 cm above Ground
                              Plane

                                                                              1. 5 m


8.3 Test Receiver Setup
During the conducted emission test, the test receiver was set with the following configurations:

     Start Frequency .......................................................................... 150 kHz
     Stop Frequency .......................................................................... 30 MHz
     Sweep Speed .............................................................................. Auto
     IF Bandwidth.............................................................................. 10 kHz
     Quasi-Peak Adapter Bandwidth ................................................. 9 kHz
     Quasi-Peak Adapter Mode ......................................................... Normal

8.4 Summary of Test Results/Plots




Report No.: STR18118061I                                               Page 18 of 20                      RF Part 15.231a


                                                                                           Model: iT728



   Test Mode          Charging+Transmitting(AC120V 60Hz)           Polarity:            Neutral




   No.         Frequency     Reading     Correct          Result     Limit     Margin         Detector
                (MHz)        (dBuV)       (dB/m)          (dBuV)    (dBuV)      (dB)
    1           0.1580        42.12       10.10           52.22      65.57     -13.35             QP
    2           0.4020        20.50       10.25           30.75      47.81     -17.06          AVG
   3*           0.4660        34.96       10.28           45.24      56.58     -11.34             QP
    4           0.4660        22.50       10.28           32.78      46.58     -13.80          AVG
    5           0.7780        17.84       10.42           28.26      46.00     -17.74          AVG
    6           0.7820        30.55       10.43           40.98      56.00     -15.02             QP




Report No.: STR18118061I                           Page 19 of 20                        RF Part 15.231a


                                                                                             Model: iT728



   Test Mode          Charging+Transmitting(AC120V 60Hz)             Polarity:              Line




   No.         Frequency     Reading       Correct          Result     Limit     Margin         Detector
                (MHz)        (dBuV)        (dB/m)           (dBuV)    (dBuV)      (dB)
    1           0.1580        23.88         10.10           33.98      55.56     -21.58            AVG
   2*           0.1660        41.47         10.11           51.58      65.15     -13.57            QP
    3           0.2100        37.43         10.13           47.56      63.20     -15.64            QP
    4           0.4740        18.28         10.28           28.56      46.44     -17.88            AVG
    5           0.7780        16.23         10.42           26.65      46.00     -19.35            AVG
    6           0.8139        29.23         10.43           39.66      56.00     -16.34            QP




                                       ***** END OF REPORT *****




Report No.: STR18118061I                             Page 20 of 20                        RF Part 15.231a



Document Created: 2019-01-31 11:13:15
Document Modified: 2019-01-31 11:13:15

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC