test report lte14

FCC ID: 2AS4L-DV429CGW4

Test Report

Download: PDF

                                                                               REPORT No.:SZ19040220W02



    1.4MHz/64QAM/Low CH                                                           1.4MHz/64QAM/MidCH




    1.4MHz/64QAM/HighCH                                                           3MHz/64QAM/Low CH




     3MHz/64QAM/MidCH                                                              3MHz/64QAM/HighCH




         SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.                   Tel: 86-755-36698555   Fax: 86-755-36698525
MORLAB   FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
         Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China   Http://www.morlab.cn   E-mail: service@morlab.cn

                                                                                                                             Page133of 169


                                                                               REPORT No.:SZ19040220W02



     5MHz/64QAM/Low CH                                                             5MHz/64QAM/MidCH




     5MHz/64QAM/HighCH                                                           10MHz/64QAM/Low CH




     10MHz/64QAM/MidCH                                                           10MHz/64QAM/HighCH




         SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.                   Tel: 86-755-36698555   Fax: 86-755-36698525
MORLAB   FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
         Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China   Http://www.morlab.cn   E-mail: service@morlab.cn

                                                                                                                             Page134of 169


                                                                               REPORT No.:SZ19040220W02



                                                  LTE Band 17CSE
     5MHz/QPSK/Low CH                                                              5MHz/16QAM/Low CH




     5MHz/QPSK/Mid CH                                                               5MHz/16QAM/Mid CH




     5MHz/QPSK/High CH                                                             5MHz/16QAM/High CH




         SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.                   Tel: 86-755-36698555   Fax: 86-755-36698525
MORLAB   FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
         Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China   Http://www.morlab.cn   E-mail: service@morlab.cn

                                                                                                                             Page135of 169


                                                                               REPORT No.:SZ19040220W02



     10MHz/QPSK/Low CH                                                            10MHz/16QAM/Low CH




     10MHz/QPSK/Mid CH                                                             10MHz/16QAM/Mid CH




    10MHz/QPSK/High CH                                                            10MHz/16QAM/High CH




         SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.                   Tel: 86-755-36698555   Fax: 86-755-36698525
MORLAB   FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
         Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China   Http://www.morlab.cn   E-mail: service@morlab.cn

                                                                                                                             Page136of 169


                                                                               REPORT No.:SZ19040220W02



     5MHz/64QAM/Low CH                                                             5MHz/64QAM/MidCH




     5MHz/64QAM/HighCH                                                           10MHz/64QAM/Low CH




     10MHz/64QAM/MidCH                                                           10MHz/64QAM/HighCH




         SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.                   Tel: 86-755-36698555   Fax: 86-755-36698525
MORLAB   FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
         Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China   Http://www.morlab.cn   E-mail: service@morlab.cn

                                                                                                                             Page137of 169


                                                                                      REPORT No.:SZ19040220W02

2.6. Band Edge

2.6.1. Requirement

According to FCC section 22.917(a), the power of any emission outside of the authorized operating
frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 +
10 log(P) dB.
According to FCC section 24.238(a),The power of any emission outside of the authorized
operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at
least 43 + 10 log(P) dB.
According to FCC section 27.53(g), For operations in the 698–746 MHz band, the power of any
emission outside a licensee's frequency band(s) of operation shall be attenuated below the
transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43 +
10 log (P) dB. Compliance with this provision is based on the use of measurement instrumentation
employing a resolution bandwidth of 100 kilohertz or greater. However, in the 100 kilohertz bands
immediately outside and adjacent to a licensee's frequency block, a resolution bandwidth of at
least 30 kHz may be employed.
According to FCC section 27.53(h), For operations in the 1710–1755MHz bands, the power of any
emission outside a licensee's frequency block shall be attenuated below the transmitter power (P)
by at least 43 + 10 log10(P) dB.
According to FCC section 27.53(m) (4), For mobile digital stations, the attenuation factor shall be
not less than 40 + 10 log (P) dB on all frequencies between the channel edge and 5 megahertz
from the channel edge, 43 + 10 log (P) dB on all frequencies between 5 megahertz and X
megahertz from the channel edge, and 55 + 10 log (P) dB on all frequencies more than X
megahertz from the channel edge, where X is the greater of 6 megahertz or the actual emission
bandwidth as defined in paragraph (m)(6) of this section. In addition, the attenuation factor shall
not be less that 43 + 10 log (P) dB on all frequencies between 2490.5 MHz and 2496 MHz and 55 +
10 log (P) dB at or below 2490.5 MHz. Mobile Satellite Service licensees operating on frequencies
below 2495 MHz may also submit a documented interference complaint against BRS licensees
operating on channel BRS Channel 1 on the same terms and conditions as adjacent channel BRS
or EBS licensees.




                SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.                   Tel: 86-755-36698555   Fax: 86-755-36698525
MORLAB          FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
                Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China   Http://www.morlab.cn   E-mail: service@morlab.cn

                                                                                                                                    Page138of 169


                                                                                     REPORT No.:SZ19040220W02

2.6.2. Test Description

                                                              Attenuator 1
                                     System                                           Power
                                    Simulator                                         Splitter
                                                                                                            EUT
          Power                    Spectrum
          Sensor                   Analyzer
                                                               Attenuator 2

The EUTis coupled to the Spectrum Analyzer (SA) and the System Simulator (SS) with Attenuators
through the Power Splitter; the RF load attached to the EUT antenna terminal is 50Ohm; the path
loss as the factor is calibrated to correct the reading. The EUT is commanded by the SS to operate
at the maximum output power. A call is established between the EUT and the SS.


2.6.3. Test procedure

KDB 971168 D01v03 Section 6.0 and ANSI/TIA-603-E-2016.




               SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.                   Tel: 86-755-36698555   Fax: 86-755-36698525
MORLAB         FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
               Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China   Http://www.morlab.cn   E-mail: service@morlab.cn

                                                                                                                                   Page139of 169



Document Created: 2019-05-10 09:14:35
Document Modified: 2019-05-10 09:14:35

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC