User manual

FCC ID: 2AR33-V2-1

Users Manual

Download: PDF
FCCID_4295520

1. Features 2. Spec of products 3. Speaker Operation 5. Package contents In 1∗user manual Item Spec Note S/N Function Speaker Operation Note 12 Siri Press power button Mobile phone with Siri 1∗micro USB cable connection and hold 1.5 seconds Model V2 Press and hold 2 Paired red and blue lights 1∗audio cable seconds until appear flash alternately After inserting the 3.5 mm FCC Statement: Bluetooth version V5.0 1 Power on Power o The blue lamp flashes audio cable, the speaker statement blue light and with This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part After inserting a 3.5 disconnects the Bluetooth once in 5 seconds after 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a Bluetooth protocol HFP A2DP HSP AVRCP “Power on” “Pairing” residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not beep. the match is successful Any Power mm stereo audio line, connection, and after installed and used in accordance with the instructions, may cause harmful interference to radio communications. Frequency 2.402GHz-2.480GHz 13 Line in o you can play pulling out the LINE IN However, there is no guarantee that interference will not occur in a particular installation. If this equipment does Press and hold 3 The red light goes on for cable, the speaker cause harmful interference to radio or television reception, which can be determined by turning the equipment Speaker input voltage DC_5V Open seconds until appear statement connected external off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 2 Power on one second and then line in songs automatically reconnects statement red light and with goes o and continues to play (1) Reorient or relocate the receiving antenna. Battery capability 1200mAh / 3.7V ‘power on ‘beep. mobile music (2) Increase the separation between the equipment and receiver. Speaker charging electric current ≤700mA Answer On the (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 3 ress power1 second Pressing the " Power" Charging time About 3h the phone phone key three times in a (4) Consult the dealer or an experienced radio/TV technician for help. Hang up Press 1 second with row will switch the Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your 4 In talking WIRELESS CHARGING LED Indicator light Wireless charger 10W the phone “Call Ended”beep. Bluetooth audio EQ mode, with a total of 6 authority to operate this equipment. Wireless charger input electric DC_5.0V DC_9.0V Refuse to Press and hold 2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: WITH BLUETOOTH SPEAKER Power botton Microphone speaker charging voltage 5 answer the On the phone seconds with“Call Rejected”beep. 14 EQ change Music playing EQ modes ( default, ROCK, POP, Classic, (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Line in led indicator light Wireless charger input electric ≤2000mA phone R & B, Country ), and RF Exposure Information Speaker charging current When the battery the audio mode of the Bluetooth Speaker usb input Low - Bluetooth speaker is The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Music playing time 5-5.5h Test conditions: use 6 power Power on voltage is as low as iPhone, the volume is statement 3.3v, there is a " battery Red light keep on the default. Wireless Charging 70% of the maximum reminder The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During Talking time 5-5.5h volume to play _ low" voice prompt Double - click the " the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the Power" key once, the device must be respected. Bluetooth call distance when Positive ≥9M, Auto power Power on The Bluetooth speaker Bluetooth speaker indoor obstacles are blocked Backward ≥7M 7 o statement will automatically shut This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio Voice voice prompt will frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Bluetooth enter the Mute state, interference to radio communications. If this equipment does cause harmful interference to radio or television Bluetooth play music distance Positive ≥10M, Any Put Micro USB cable 15 prompt in reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 8 Charging Red light keep on and double-click the " when indoor obstacles are blocked Backward ≥8M statement into the micro USB correct the interference by one or more of the following measures: Model:V2 Microphone 4015 @ 42+/-3 dB input on/o connection Power" key once again to cancel the (1)Increase the separation between the equipment and any other radio device. Charging Charging Battery charging full 9 full statement Red light o Mute state of voice (2)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Speaker Φ42mm 4Ω prompt. playing/ standby/ Press 1 second power Bluetooth speaker in DECLARATION OF CONFORMITY Frequency Range 20 - 20, 000 Hz 10 playing Hereby Shenzhen Maxco Technology Co.,Ltd declares that the equipment type suspend button normal using 4. Wireless charger operation music V2 The is in compliance with Directive 2014/53/EU Within the scope of acceptance, power The mobile phone is Power - on on with“power on” Pairing” Manufacturer:Dongguan King Yuk Supply Chain Company Limited automatic Power o Mobile Wireless placed in the wireless Address: Floor 4th, Ao Bei Road No.9, Yantian Village, Fenggang Town, Dongguan, 11 “Bluetooth_connected”beep, The Mobile phone support Product user manual wireless charger reconnection statement Bluetooth speaker will be connected function 1 phone charging charger base charging area of the charging seat to wireless charger Guangdong, China charging usb input back to the connected phone. realize charging Importer:xxx Importer's Address:xxx


Document Created: 2019-01-08 14:12:57
Document Modified: 2019-01-08 14:12:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC