2AR2I-CSCM6000

FCC ID

Equipment: CADD Solis

Smiths Medical ASD, Inc. -CSCM6000

6000 Nathan Lane North, Plymouth, MN 55442 United States

Application
Frequency Range
Final Action Date
Granted
2Gt875GZFqAGBZcMGS1n6g==
5180.0-5320.0
2019-11-12
APPROVED
2Gt875GZFqAGBZcMGS1n6g==
5500.0-5700.0
2019-11-12
APPROVED
2Gt875GZFqAGBZcMGS1n6g==
5745.0-5825.0
2019-11-12
APPROVED
wB3IT0hyVULkSHlCsy0c6g==
2402.0-2480.0
2019-11-12
APPROVED
wB3IT0hyVULkSHlCsy0c6g==
2412.0-2462.0
2019-11-12
APPROVED
TMg9rjqdbeIzdxjvp/TyaQ==
5180.0-5320.0
2019-10-02
APPROVED
TMg9rjqdbeIzdxjvp/TyaQ==
5500.0-5700.0
2019-10-02
APPROVED
TMg9rjqdbeIzdxjvp/TyaQ==
5745.0-5825.0
2019-10-02
APPROVED
dU1p2JtW88TJAUa+Ol9rdg==
2402.0-2480.0
2019-10-02
APPROVED
eI/JC8FvWl5ZEwwnY03WRA==
2402.0-2480.0
2019-10-02
APPROVED
eI/JC8FvWl5ZEwwnY03WRA==
2412.0-2462.0
2019-10-02
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2019-11-12 00:00:00 pdf
User Manual part 2 of 2Users Manual 2019-11-12 00:00:00 pdf
User Manual part 1 of 2Users Manual 2019-11-12 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-11-12 00:00:00 pdf
SAR report part 2 of 2RF Exposure Info 2019-11-12 00:00:00 pdf
SAR report part 1 of 2RF Exposure Info 2019-11-12 00:00:00 pdf
ID LabelID Label/Location Info 2019-11-12 00:00:00 pdf
Internal PhotosInternal Photos 2019-11-12 00:00:00 pdf
Agent Authorization LetterCover Letter(s) 2019-11-12 00:00:00 pdf
External PhotosExternal Photos 2019-11-12 00:00:00 pdf
Cover LetterCover Letter(s) 2019-11-12 00:00:00 pdf

Application Details:

EquipmentCADD Solis
FRN0028060820
Grantee Code2AR2I
Product Code-CSCM6000
Applicant BusinessSmiths Medical ASD, Inc.
Business Address6000 Nathan Lane North , Plymouth,Minnesota United States 55442
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMaxine Chen –
Applicant Phone
Applicant Fax763-383-3678
Applicant Email[email protected]
Applicant MailStop
Test FirmUL Japan, Inc. Head office EMC Lab.
Test Firm ContactTetsuya Hashimoto
Test Firm Phone
Test Firm Fax+81-596-24-8095
Test Firm Email[email protected]
Certified ByToshiro Kometani – General Manager
Comment [2Gt875GZFqAGBZcMGS1n6g==]: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. This C2PC is to authorize a specific portable exposure condition that results when this module is installed in the Smiths Medical, Model CADD Solis ambulatory infusion pump. The highest reported SAR value is 0.13 W/kg.
Comment [dU1p2JtW88TJAUa+Ol9rdg==]: Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [eI/JC8FvWl5ZEwwnY03WRA==]: Single Modular Approval. Output power listed is Conducted( Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [TMg9rjqdbeIzdxjvp/TyaQ==]: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection.
Comment [wB3IT0hyVULkSHlCsy0c6g==]: Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This C2PC is to authorize a specific portable exposure condition that results when this module is installed in the Smiths Medical, Model CADD Solis ambulatory infusion pump. Bluetooth is disabled in this configuration. The highest reported SAR value is 0.61 W/kg.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC