2AQ5IOCUS1

FCC ID

Equipment: WLAN 2x2 MIMO 802.11 a/b/g/n/ac with Bluetooth

Grundium OCUS1

Hermiankatu 6-8F, Tampere, N/A 33720 Finland

Application
Frequency Range
Final Action Date
Granted
4mydl5e7hUF9DhX3u9n/3g==
5180.0-5240.0
2019-02-07
APPROVED
4mydl5e7hUF9DhX3u9n/3g==
5260.0-5320.0
2019-02-07
APPROVED
4mydl5e7hUF9DhX3u9n/3g==
5500.0-5700.0
2019-02-07
APPROVED
4mydl5e7hUF9DhX3u9n/3g==
5745.0-5825.0
2019-02-07
APPROVED
pg23g1QmaV2zAmI829b70A==
2402.0-2480.0
2019-02-07
APPROVED
pg23g1QmaV2zAmI829b70A==
2412.0-2472.0
2019-02-07
APPROVED
eJtgrnjxYkSMCsGr/bMHJA==
2402.0-2480.0
2019-02-07
APPROVED
File NameDocument TypeDateDirect
Label InfoID Label/Location Info 2019-02-07 00:00:00 pdf
External PhotosExternal Photos 2019-02-07 00:00:00 pdf
Change of ID Request LetterCover Letter(s) 2019-02-07 00:00:00 pdf
Original Grantee AuthorisationCover Letter(s) 2019-02-07 00:00:00 pdf
Autorisation LetterCover Letter(s) 2019-02-07 00:00:00 pdf
Authorisation LetterCover Letter(s) 2019-02-07 00:00:00 pdf

Application Details:

EquipmentWLAN 2x2 MIMO 802.11 a/b/g/n/ac with Bluetooth
FRN0027752914
Grantee Code2AQ5I
Product CodeOCUS1
Applicant BusinessGrundium
Business AddressHermiankatu 6-8F , Tampere,N/A Finland 33720
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMika Kuisma –
Applicant Phone 46952
Applicant Fax+358503546952
Applicant Email[email protected]
Applicant MailStop
Test FirmUL Verification Services Inc. (formerly UL CCS)
Test Firm ContactNancy Gruspe
Test Firm Phone
Test Firm Fax000-000-0000
Test Firm Email[email protected]
Certified ByM. Kuisma – CEO
Comment [4mydl5e7hUF9DhX3u9n/3g==]: Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Comment [eJtgrnjxYkSMCsGr/bMHJA==]: Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Comment [pg23g1QmaV2zAmI829b70A==]: Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC