15_FIR1702 UserMan

FCC ID: 2AMLJ-FIR1702

Users Manual

Download: PDF

     Electric smart sleeping bag
            User manual
                           Model:FIR1702



1、 Preparation:

    (1)Download our APP:

    Please scan the following QR code , or

   visit our website: www.firsermo.cn to download.

   For IOS system, please scan the following:




   For Android system, please scan the following:




   (2)Put on your smartphone Bluetooth status.


          2、   Connect the controlling unit as the following chart indicated :

            (1) For campers, If direct power socket available,,do as chart 1 :

                First, find the terminal of sleeping bag, and connect it with the controlling

                   Unit. Secondly, connect our enclosed adapter, one side to the controlling

                   Unit, the other side to a jack socket to get power.




Chart1: For campers

               ① Sleeping bag

               ② Terminal

               ③ Controlling unit

               ④ Adapter & line

               ⑤      Power socket.


            (2)For hikers, do as chart 2:

                 First, find the terminal of sleeping bag, and connect it with the controlling

                 Unit. Secondly, connect the USB cable, one side to the controlling unit,

                 the other side to USB output( power bank or any other USB device.)




CHART 2:   For hikers
                   ① Sleeping bag

                   ② Terminal

                   ③ Controlling unit

                   ④ Usb cable

                   ⑤ 2A USB output( Power bank or any other USB device )


3、APP operation guide:

    After step 1、2,now you can operate our APP as follow:

    (1) Open APP , push “Scan” button to search the “sleeping bag/blanket”




    (2) Now If you find the “sleeping bag/blanket”, then push to activate it.

          If you use it first time, code is necessary. (The original code:8888)


(3)Choose “foot area” or ”waist area”, or both, which means the

   Different location of your sleeping bag/blanket that you want to

   Warm up.



(4) Put “switch” on first, then you can set the running time or set the

    FIR strength:



    **Set the FIR strength by sliding the green bar to a target percentage,

     After running about 2 minutes, the real FIR strength will be indicated by

     the pink color underneath.


         **Set the running period by rolling the timetable to a target future

            Time, then it will countdown from now.




4、Equipment management:

       You can change the password or rename the product by following the

      Instruction hereby indicated.

5、Please note that the enclosed adapter is specially designed only for our

  Sleeping bag, it cannot be used to charge any kind of smart phone.


FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.



Document Created: 2018-08-29 11:28:42
Document Modified: 2018-08-29 11:28:42

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC