Experiment Description

0920-EX-CN-2017 Text Documents

Qualcomm Technologies, inc.

2017-12-11ELS_202170

FCC Form 442 12.2-12.7 GHz Experiment Description 1 Introduction Qualcomm's technologies powered the smartphone revolution and connected billions of people. We pioneered 3G and 4G – and now we are leading the way to 5G and a new era of intelligent, connected devices. Our products are revolutionizing industries, including automotive, computing, IoT, healthcare and data center, and are allowing millions of devices to connect with each other in ways never before imagined. Qualcomm Incorporated includes our licensing business, QTL, and the vast majority of our patent portfolio. Qualcomm Technologies, Inc., a subsidiary of Qualcomm Incorporated, operates, along with its subsidiaries, all of our engineering, research and development functions, and all of our products and services businesses, including, our QCT semiconductor business. For more information, visit Qualcomm’s website, OnQ blog, Twitter and Facebook pages. Qualcomm is conducting limited antenna pattern testing of antennas designed for use in the 12.2-12.7 GHz frequency range. The antenna testing requires a large separation distance to gather far field data due to the frequencies and antenna aperture size and cannot be completed in Qualcomm anechoic chamber. This request is to extend the period covered by an STA (call sign WL9XIT) which expires 31 December 2017. In that STA, at the request of BSS operators, and the direction from the FCC to obtain their consent, we showed that the interference "EPFD" level requested should be < -171dBW/ M2/4KHz. We confirm that this EPFD levels will remain below this limit and that the test configuration remains unchanged. The configuration described here meets those requested levels and simulations have been shared with all BSS operators concerned that demonstrate compliance. Qualcomm respectfully requests the Commission to grant an Experimental license to enable Qualcomm to continue with these important antenna characterization measurements 2 Transmitter Information Testing is temporary and expected to occur infrequently for up to twleve months while the test measurements are completed. The transmitter will only be operational during active testing that occurs at any time during the day or week. Test periods are typically 10-30 minutes when testing is active. A highly directional antenna, with very low power levels has been selected to meet BSS operators requested interference levels of -171dBW/M2/4KHz . It is mounted and pointed so as to use the building structure to provide additional shielding to back-lobes is shown in figure 1 and 2 and attachment A. Table 1 defines the transmitter information and Table 2 defines the site location. A single, low-power continuous wave form (“CW”), measurement signal will be transmitted from the site defined in Table 2 at a fixed orientation. Eight test frequencies which have been agreed with BSS operators are specified in Table 3. 12/11/2017 QUALCOMM Incorporated Page 1 of 5

FCC Form 442 The equipment under test (“EUT”) is a receive antenna that is located on another building as shown in Figure 2. The receive antenna’s orientation is moved in a process to evaluate the antenna pattern. Table 1 Transmitter Information Peak EIRP W Peak Antenna Type Frequency (GHz) dBm dBW W ERP Emission BW EIRP Gain (dBi) Fixed 12.2-12.7 15.6 -14.4 0.036 0.036 30.7 CW (At table 3 intervals) Figure 1 Fixed Site Antenna Pattern 12/11/2017 QUALCOMM Incorporated Page 2 of 5

FCC Form 442 Figure 2 Location of Test antenna and transmit path N 172.8 degrees (south) Table 2 Transmitter Site Information Site Elevation Antenna Address County Lat Long 3dB Beamwidth Azimuth # Type 1 5745 Pacific San Diego 32 54 14 N 117 11 47 W 4 degrees 172.8 +2.8 Directional Center Blvd degrees degrees 15 inch San Diego, (south) above reflector CA 92121 horizon 12/11/2017 QUALCOMM Incorporated Page 3 of 5

FCC Form 442 Table 3 BSS Coordinated Transmitter Test Frequencies BSS BSS CH center Test frequency Channel Frequency number (MHz) 12,238.68 2 12,238.58 12,297.00 6 12,296.90 12,355.32 10 12,355.22 12,413.64 14 12,413.54 12,471.96 18 12,471.86 12,530.28 22 12,530.18 12,588.60 26 12,588.50 12,646.92 30 12,646.82 All test signals are Continuous Wave (CW) with an Emission designator 100HN0N with an input power to the antenna of -45dBW. 3 License Requested Qualcomm respectfully requests the Commission to grant an experimental license to enable us to complete important antenna performance measurements 4 Points of Contact to stop transmission The following points of contact is available as a stop buzzer. Email ku.spectrum.shutdown@qti.qualcomm.com; or Brian Jones 5775 Morehouse Drive San Diego CA 92121 858 658 4751(24 hrs hour contact) brjones@qti.qualcomm.com 12/11/2017 QUALCOMM Incorporated Page 4 of 5

QI.IALCONVV\' Attachment A Figure 1. Antenna pattern and location Antenna Pattern and New Location 15n_Textanterna


Document Created: 2017-12-11 13:48:22
Document Modified: 2017-12-11 13:48:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC