Experiment Description

0758-EX-CN-2017 Text Documents

Qualcomm Technologies, Inc

2017-09-19ELS_198555

FCC Form 442 4400-4940 MHz Experimental License Application for 5G Development Work 1 Introduction Qualcomm’s technologies powered the smartphone revolution and connected billions of people. We pioneered 3G and 4G – and now we are leading the way to 5G and a new era of intelligent, connected devices. Our products are revolutionizing industries, including automotive, computing, IoT, healthcare and data center, and are allowing millions of devices to connect with each other in ways never before imagined. Qualcomm Incorporated includes our licensing business, QTL, and the vast majority of our patent portfolio. Qualcomm Technologies, Inc., a subsidiary of Qualcomm Incorporated, operates, along with its subsidiaries, all of our engineering, research and development functions, and all of our products and services businesses, including, our QCT semiconductor business. For more information, visit Qualcomm’s website, OnQ blog, Twitter and Facebook pages. This experimental license request is in support of a small 5G R&D development and demonstration network contained planned for operation within a 0.5-mile radius of Qualcomm’s campus in Sorrento Valley area of San Diego, California. The R&D network will utilize two 100 MHz transmission bandwidths within the frequency range of 4.4-4.94 GHz. The requested frequency range of 4.4-4.94 GHz is for technology development purposes only and not targeted for future non-federal wireless communication deployment in the United States. 2 Experiment Description The network supported by this experimental license is critical for Qualcomm to develop, validate, and then demonstrate 5G technology wireless communications systems. Qualcomm designed the network to generate the smallest amount of RF interference to incumbents in the requested frequency range while also providing the RF coverage area required for engineering development and showcasing advanced wireless technology for indoor, outdoor, static and mobility user environments. The network is required to support both conventional passive antennas configurations as well as advanced beam forming technologies that will be utilized by 5G networks. Deliberate placement and positioning of directional antennas limit the usable engineering RF test coverage area to a 0.5-mile radius. Although the EIRP for the fixes sites has been reduced below target EIRP values proposed by 5G network operators, Qualcomm anticipates the carefully designed network will still provide the required engineering value need for the technology development goals. The network utilizes four fixed sectors to provide the RF coverage area to a maximum of 30 mobile devices anywhere within the 0.5-mile coverage area. Three of the locations utilize one directional antenna while the third site has two directional antennas. The mobile devices can be used in static locations, in vehicles, or in human mobility scenarios. Most mobile testing occurs at ground level but some mobiles may on occasion be located inside buildings exceeding one story. The intent is to operate the networks 24 hours per day, 7 days per week. 3 Transmitter Information The test network utilizes a single TDD 100 MHz channel bandwidth transmitted in the range of 4.4-4.94 GHz at a fixed center frequency. The license requests a frequency range wider than a 100 MHz frequency span to provide center frequency flexibility if needed to address technical or interference September 2017 Qualcomm Technologies, Inc. Page 1 of 4

FCC Form 442 challenges that may occur during testing. The intent is to identify at least two 100MHz channel bandwidths within the frequency range for testing. Both fixed and mobile transmitters use OFDM modulation with a FCC emission designator of 100M00W7W. Table 1 describes the technical parameters of the four fixed sites required for the network that are located on three different buildings. Building “AY” has two directional antennas while the other three sites have only one directional antenna. The EIRP in Table 1 represents the highest EIRP MIMO beamforming operation mode of operation resulting from the achieved beamforming array gain. The EIRP is lower when operating in a non-beamforming mode. The directional fixed site antennas planned for use have not been selected but are planned to follow the antenna pattern shown in Figure 1 when operating in a beamform configuration. In the beamforming mode, the 3dB beamwidth is anticipated to be approximately 8° in elevation and approximately 2° in azimuth while tracking a target receiver. Without beamforming, the 3dB beamwidth is approximately 8° in elevation and approximately 74° in azimuth. In both cases, the front to back lobe ration is expected to exceed 20dB. Mobile devices use omni directional antennas. Figures 2 shows the test network area location in San Diego and Figure 3 provides a visual of the resulting RF coverage area required for the engineering activities. Table 1 Transmitter Information in the frequency range of 3.4-3.550 GHz Ant. EIRP / ERP / Ant. Height Total EIRP / 100 100 EIRP / 1 Longitude Height (m) Azimuth Tilt 100 MHz MHz MHz Hz Site Name Latitude [m] AGL AMSL [°] [°] [dBm] [W] [W] [dBm] Bldg_N 32 53 46 N 117 11 43 W 53 148 35 8 65 3162 1919 -15 Bldg_AY_1 32 54 6 N / 117 11 35 W 26 123 285 4 65 3162 1919 -15 Bldg AY_2 32 54 6 N / 117 11 34 W 26 123 120 0 65 3162 1919 -15 Q_Parking 32 54 11 N / 117 11 58 W 17 124 60 0 65 3162 1919 -15 Mobile 0.5-mile radius Varies Varies Omni Omni 26 0.40 0.24 -54 Devices Figure 1 Anticipated Beamforming Antenna Pattern August 28, 2017 Qualcomm Technologies, Inc. Page 2 of 4

FCC Form 442 Zoom showing Sorrento Valley and 0.5-mile fixed site coverage radius San Diego Area Figure 2 Test Network Area in San Diego August 28, 2017 Qualcomm Technologies, Inc. Page 3 of 4

FCC Form 442 Site locations depict the directional antenna azimuths Figure 3 Intended Test Coverage Area 4 Interference Coordination Immediate requests for Qualcomm to stop transmission should be emailed to qualcomm.transmitter.shutdown@qualcomm.com. Alternatively, a shutdown requested can be submitted through John Forrester who can be contacted at 858-845-7428 or jforrest@qti.qualcomm.com August 28, 2017 Qualcomm Technologies, Inc. Page 4 of 4


Document Created: 2017-09-19 15:05:36
Document Modified: 2017-09-19 15:05:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC