CWS 111 Data Sheet

0425-EX-PL-2016 Text Documents

Parallel Wireless, Inc.

2016-06-09ELS_177926

Parallel Wireless CWS-111 Outdoor Hardware Data Sheet Overview The Converged Wireless System CWS-111 is a software-defined – multi- mode – multiband base station. It supports 3G, 4G, and Wi-Fi and integrates CWS-111 flexible backhaul (including wireless) all in the same form factor. Multi-mode (3G, 4G, The CWS-111 is available in a low power solution and a high power solution. Wi-Fi) multi-band The high power solution requires the addition of a Local Radio Head and an base station with RF Filter module. This design approach helps to achieve the right level of integrated flexible system flexibility and attractive economics for Service Providers to deliver backhaul (including variants for a wide-variety of deployments with the lowest cost/unit coverage wireless mesh) ratio. The innovative design economically supports 3G and 4G, backhaul and a higher power output resulting in the following benefits: Key Features • Leverages the same • Larger coverage area with one base station silicon for 3G and 4G • Enhanced in-building penetration with down tilted antennas • 3GPP compliant • A true wireless broadband level of service enablement for the • SON-based subscribers with more data throughput interference mitigation Both, the low and high power CWS-111 is configured and managed by the • Self-configuring, self- Parallel Wireless HetNet Gateway (HNG). The CWS can be deployed and optimizing, and self- maintained without any specialized staff. The HNG makes the CWS nodes managing via HetNet Gateway self-configurable, self-optimizing, provides resilience, and enables meshing between the nodes using licensed or unlicensed spectrum. Key Benefits • Cost-effective, The CWS base supports Wi-Fi, 3G (WCDMA) and 4G(LTE) in the same resilient coverage form factor, which helps drive the overall cost down resulting in: outdoors and indoors • Lower overall TCO • Sites that can support multiple technologies à fewer sites • Flexibility in • Support for neutral host deployments at much lower cost than deployment: fewer traditional DAS system due to flexible backhaul capabilities and cloud based sites; sites that can real-time orchestration. support multiple sectors Key Features and Capabilities • 3G, 4G/LTE, and Wi-Fi • Integrated flexible backhaul: LOS and nLOS; Fiber/Ethernet/LTE, multi-radio multi-point- to-multi-point wireless mesh Parallel Wireless, Inc. Proprietary and Confidential ds-CWS-111-G-20150804-2

• 3GPP compliant across all components • 3GPP compliant “Plug-n- Play” security • SON-based interference mitigation • Carrier-grade hardware • Low power consumption • Software-enabled remote diagnostic to detect, monitor, and alarm Deployment Options CWS-111, an outdoor product series node, can be attached to any street furniture and is pre- assembled and pre-configured. Recommended applications: • To improve coverage (including larger coverage area and improved in-building from zero bars to 4 bars) and capacity in high density urban environments • To provide low-cost coverage in rural areas • For general-purpose rugged outdoor and indoor wireless LAN CWS-111 Base Specifications at a Glance Architecture High-capacity platform for cost-effective, resilient coverage Flexibility Virtualized design: functions based on software are not coupled to hardware: • Self-configuring • Self-optimizing • Self-healing • Multi-radio backhaul mesh Air Interface 3GPP Release 9 compliant Software Features • QoS based mesh routing • IPsec • SON resource control Timing Support Built-in GPS, using external antenna Antenna Type Connectors for long haul link support with high gain/narrow beam antenna & omni/sectored antenna Resilience Full hardware and software redundancy, as well as high-availability software techniques Temperature Weatherproof fanless outdoor enclosure (-33 °C to +50 °C) Interference Fully automatic via HetNet Gateway management Parallel Wireless, Inc. Proprietary and Confidential ds-CWS-111-G-20150804-2

Enclosure IP67 Enclosure CWS hardware family is designed to comply with these standards (in progress): Regulatory and Compliance Ingress Protection Outdoor IP67 IEC529, Mil-Std-810f Class ("Dust tight", "Immersion") Safety & EN 60 950-22 / UL 60950 / CSA C22.2 Environmental RoHS Directive 2002/95/EC Directive 1999/519/EC, EN 50383, 50384 Radio & EMC FCC Part 27 Compliance FCC Part 90 2004/108/EC R & TTE directive 1999/5/EC EN 55022 Class B EN 55022 Class B ETSI EN 301 489-1 V1.9.2 ETSI EN 301 489-4 V1.4.1 ETSI EN 301 489-23 V1.5.1 ETSI EN 201 468 V1.3.1 ETSI TS 125 113 V10.2.0 ETSI EN 301 908-1 V5.2.1 ETSI EN 301 908-3 V5.2.1 ETSI EN 301 502 V9.2.1 CE Marking 93/68/EEC 2006/95/EEC Note: Current and future features are listed. Parallel Wireless, Inc. Proprietary and Confidential ds-CWS-111-G-20150804-2


Document Created: 0780-04-24 00:00:00
Document Modified: 0780-04-24 00:00:00
© 2026 FCC.report
This site is not affiliated with or endorsed by the FCC