radar being tested

0063-EX-PL-2008 Text Documents

Network Transportation Technologies LLC

2008-02-04ELS_87755

DATA SHEET Product Family: K-Band Transceivers K-Band Transceiver with two integrated patch antennas, RF- and IF-pre-amplifier IPS-146 (and variants IPS-146_UK / IPS-146_F) Description: - radar-based motion detector - advanced PHEMT-oscillator with low current consumption - RF-pre-amplifier for lowest noise operation - split transmit and receive path for maximum gain - stereo (dual channel) operation for direction of motion identification - IF-pre-amplifier, bandwidth limited for lowest noise performance - enable input for oscillator shut down - small outline dimensions Absolute Maximum Ratings: Parameter Symbol Rating Units supply voltage VCC 5.5 V operating temperature (out of spec) TOP - 40 / + 85 °C storage temperature TSTG + 90 °C Electrical Characteristics: Parameter Symbol min. typ. max. units comment transmit frequency fIPS-146 24.000 24.125 24.250 GHz fIPS-146_UK 24.150 24.200 24.250 GHz fIPS-146_F 24.075 24.125 24.175 GHz output power (EIRP) Pout 18 dBm temperature drift ∆f -1 MHz/°C antenna pattern horizontal 30 ° azimuth vertical 32 ° elevation side lobe suppression horizontal 20 dB azimuth vertical 20 dB elevation I/Q balance amplitude 6 dB phase 60 90 120 ° IF output voltage offset VCC/2 V IF-amplifier gain 50 dB bandwidth 50 – 10k Hz supply voltage VCC 4.75 5.0 5.25 V supply current I 60 80 mA IF-amp included operating temperature TOP - 20 + 60 °C outline dimensions 60 x 37 x 9 mm Version 4.2 IPS-146 page 1 of 3 2007-10-12

Interface: The sensor provides a 2.54 mm grid, single row pin header (square pin 0.635 mm). Pin # Description In/Out Comment 1 NC not connected 2 enable input active low 3 VCC input supply voltage 4 GND input analog ground 5 IF2 output Signal Q(uadrature) 6 IF1 output Signal I(nphase) Mechanical Outlines: (dimensions in mm) elevation azimuth Version 4.2 IPS-146 page 2 of 3 2007-10-12

Certification and environment protection: InnoSenT GmbH has established and applies a quality system for: Development, production and sales of radar sensors for commercial and industrial sensors An audit was performed, Report No. 010350 Proof has been furnished that the requirements according to DIN EN ISO 9001:2000 are fulfilled. This InnoSenT product is compliant to the restriction of hazardous substances (RoHs – European Union directive 2002/95/EG). Contact Information: InnoSenT GmbH Phone: +49 (0) 9528-9518-0 E-Mail: info@InnoSenT.de Am Roedertor 30 Fax: +49 (0) 9528-9518-99 Web: www.InnoSenT.de 97499 Donnersdorf Germany Version 4.2 IPS-146 page 3 of 3 2007-10-12


Document Created: 2008-01-16 11:32:20
Document Modified: 2008-01-16 11:32:20
© 2026 FCC.report
This site is not affiliated with or endorsed by the FCC