STA Experimentation Description and Location

1327-EX-ST-2015 Text Documents

Intel Corporation

2015-12-17ELS_170562

17-December-2015 Testing to be Performed Intel’s research and development teams have been designing new radio technologies for the next generation broad band wireless devices. The intent of the sounding and path estimation validation is to provide data to compare and calibrate path estimation and simulation tools. Testing is done entirely with test equipment. Rohde & Schwarz R&S SMW200A Vector Signal Generator R&S AFQ100B UWB signal and I/Q Modulation Generator R&S SMB100A Microwave Signal Generator Location: Location: 1.5 km radius centered on coordinates: "40°43'51.59"N 74°32'22.69"W (See photo below) Test Duration: 90 days, beginning 16-January-2016 “Stop button” – stopbuzzer@intel.com; John Hammond 503-264-8726 Transmitter & Antenna Parameters: Parameter Value Antenna setup (# of simultaneously supported 1 TX station and 1 RX station TX and RX at BS and MS) Maximum number of simultaneously supported 2 frequency bands Frequency bands to test 3400 – 4200 MHz 27.5 – 28.5 GHz Bandwidth (maximum) 100 – 800 MHz Typically in 50 MHz increments Multipath time resolution approx. 1 ns Waveform Optimized multi-tone sequence TX power 33 dBm ERP Intel Corporation th 2111 NE 25 Avenue, JF2-15 Hillsboro, OR 97124

Measurement repetition rate ≥ 1 kHz System processing gain ≥ 60 dB (≥ 100 dB expected for (without further post-processing) static scenarios with channel coherence time in the order of 1 s) Antenna characteristics at TX / RX omnidirectional / omnidirectional Antenna gain at TX / RX approx. 2 dBi Antenna azimuth 3 dB beam width omnidirectional Antenna elevation 3 dB beam width approx. 80 deg. Antenna polarization at TX / RX vertical / vertical AMSL 79 meters Antenna Height AGL Above Ground 6.1 meters Intel Corporation th 2111 NE 25 Avenue, JF2-15 Hillsboro, OR 97124

ieluale Cns oogleearth R


Document Created: 2015-12-17 15:32:52
Document Modified: 2015-12-17 15:32:52
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC