Data Sheet

0646-EX-ST-2005 Text Documents

Go Networks, Inc

2005-11-02ELS_73339

PRELIMINARY DATA SHEET GO Networks' Metro Broadband Wireless System Introducing Carrier Class Performance and Reliability to WLANs The GO Networks Metro Broadband Wireless (MBW) system is the industry’s first standards-based wireless LAN (WLAN) solution that enables service providers to reliably deliver profitable, differentiated services such as voice, video and data. Combining patent-pending Advanced Array Technology® (AAT) with sophisticated algorithms for spectrum optimization, GO’s MBW is the most cost effective carrier class WLAN solution available today. Carriers’ WLAN Deployment Challenges Using GO's AAT and real-time analysis of the RF WLANs are predominantly designed for spectrum, the GO MBW detects interference in enterprise deployment – not for the large- the network's coverage area and mitigates its scale, high-capacity, indoor and outdoor effects. deployments required by service providers in This ensures superior SNR (signal-to-noise ratio) order to distribute high-value voice, data and and improves system capacity. entertainment to their growing customer base. Restricted EIRP (Effective Isotropic The GO MBW provides real-time, over-the-air Radiated Power) in certain geographies and QoS per user (or user profile) through traffic and RF (Radio Frequency) interference have put user classification. It leverages MBW's multiple limits on range, capacity and quality. The channel operation, enhancing the provisioning of result is a number of obstacles – high cost of differentiated services such as voice, video and ownership, impaired quality of service (QoS), data in both indoor and outdoor environments. KEY BENEFITS and increased vulnerability to interference from nearby equipment. This combination of Superior Economics technological deficiencies, resulting in Since the GO MBW is fully standards compliant ƒ Carrier class system and does not require any changes on the client inconsistent network behavior, is crippling ƒ Supports differentiated carriers and service providers from deploying side, this robust carrier class WLAN system Wi-Fi networks that will offer the very offers a higher return on investment and lower services such as voice, services their customers demand. total cost of ownership for carriers looking to video and data capitalize on the proliferation of Wi-Fi technology. ƒ Extended range and FINALLY, A WLAN SOLUTION DESIGNED capacity FOR CARRIERS SYSTEMS COMPONENTS ƒ Optimized for restricted Intended for Harsh Environments WLAN Sector Base-Station: The MBW WLAN EIRP geographies The GO MBW was specifically designed to Sector Base Station (WLS) is a high-performance meet the stringent requirements of carriers, WLAN access solution that supports the ƒ Fully compliant with offering software and hardware redundancy, simultaneous, non-synchronous use of three non- IEEE 802.11 as well as benchmark settings for availability, overlapping 802.11b/g channels within a single reliability and manageability. It is the only base station. Utilizing GO Networks' unique ƒ No changes required on solution specifically intended for large-scale, Advanced Array Technology and interconnected the client side high-interference environments, and the first to the Wireless Network Controller (WNC) for ƒ Interference mitigation solution that can provide high bandwidth as inter-base station optimization, it provides 3-4x well as support for delay-sensitive the range and capacity, as well as support for 5- ƒ Quality of service applications in harsh outdoor deployments. 6x the number of users and simultaneous Unmatched Coverage, Range, Quality sessions of existing WLAN equipment. ƒ Lower TCO, faster ROI and Performance Wireless Network Controller: The Wireless The GO MBW combines AAT smart antenna Network Controller is a high-performance H/W techniques with patent-pending algorithms to solution that provides functionality such as inter- extend the reach of the WLAN (3-4x range) base station optimization, low-latency roaming and ensure higher capacity per user (5-6x) at between base stations, access controller every given distance when compared to functionality (including user authentication), QoS other WLAN systems. provisioning per user or user profile, as well as centralized interface to management and billing systems. Confidential & Proprietary

PRELIMINARY DATA SHEET TECHNICAL SPECIFICATIONS Wireless Authentication and Security • Wireless Network Standards: IEEE 802.11b, IEEE 802.11g • Web authentication support • Number of Channels: Three simultaneous, non-overlapping • WPA-PSK, 40/128 bit WEP encryption 802.11b/g channels (Rx and Tx) • Standard RADIUS server interface • Frequency band: 2.412-2.483 GHz Interfaces • Advanced Array Technology® (AAT) • Antenna: • WLAN Sector Base Station: • Antenna type: Integrated sector directional antenna • Uplink: RJ-45: 10/100 Base T • Antenna azimuth coverage: 120 o • Serial port for configuration • Antenna gain: 14 dBi • Wireless Network Controller: • Modulation: • WLAN interface: RJ-45: 10/100/1000 Base T • 802.11b – DSSS (Direct Sequence Spread Spectrum): • Backbone interface: RJ-45: 10/100/1000 Base T ƒ 1 Mbps: DBPSK (Differential Binary Phase Shift Keying) • Out-Of-Band Management and Redundancy (high availability): ƒ 2 Mbps: DQPSK (Differential Quadrature Phase Shift 1 x RJ-45: 10/100/1000 Base T Keying) • RS-232 for hardware configuration ƒ 5.5 & 11 Mbps: CCK (Complementary Code Keying) Hardware Specifications • 802.11g – OFDM (Orthogonal Frequency Divisional Multiplexing): • WLAN Sector Base Station: ƒ 6 & 9 Mbps: BPSK • Dimensions: 40 x 60 x 7 cm, 15.7 x 23.6 x 2.7 in (W x H x D) ƒ 12 & 18 Mbps: QPSK • Weight: 5 kg, 11 lbs ƒ 24 & 36 Mbps: 16-QAM (Quadrature Amplitude Modulation) • Installation: ƒ 48 & 54 Mbps: 64-QAM ƒ Wall mount • Media Access Protocol: CSMA/CA (Carrier Sense Multiple ƒ Pole mount (optional) Access/Collision Avoidance) with ACK • Operating Temperature: -40° to 55°C, -40° to 131° F • EIRP: • Storage Temperature: -40° to 60°C, -40° to 140° F • ETSI: 20 dBm • Compliant with ETSI ETS-300-019-1-4, class 4.1 • FCC: 33 dBm • Operating relative humidity (non-condensing): 15% to 100% • MII (China): 27 dBm • Non-operating relative humidity (non-condensing): 5% to 95% • Rx Sensitivity: • Optional Accessory: • 802.11b: -97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, ƒ Base Station power supply unit (AC to DC, -48 VDC, 48W) -93 dBm @ 5.5 Mbps, -88 dBm @ 11 Mbps ƒ Pole mount kit • 802.11g: -88 dBm @ 6 Mbps, -87 dBm @ 9 Mbps, • Wireless Network Controller: -85 dBm @ 12 Mbps, -83 dBm @ 18 Mbps, • Dimensions: 48.2 x 8.9 x 50 cm, 19 x 3.5 x 19.6 in (W x H x D) -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, • Weight: 15 kg, 36 lbs -72 dBm @ 48 Mbps, -71 dBm @ 54 Mbps • Power supply: 400W • Spectrum management, load balancing algorithms • Installation: • Wireless backhaul provisioning ƒ rack mount ƒ shelf Networking • Operating Temperature: 5° to 45°C, 41° to 113° F • NAT support • QoS, traffic classification Standards Compliance • IP Routing (static, RIP v2, OSPF) • EMC Standards • Layer 2 and Layer 3 support • FCC Part 15.107 and 15.109 • DHCP Client, Server and Relay • ICES-003 (Canada) • Full standard RADIUS AAA server interface • EN 301.489-1 and -17 (Europe) • 1+1 Redundancy for Wireless Network Controller • EMI and Susceptibility (Class B) • FCC Part 15.107 and 15.109 Management • ICES-003 (Canada) • SNMP V2 • EN 301.489-1 and -17 (Europe) • GO private, standard MIBs • Safety Standards • Local CLI via serial port • UL 1950 • Remote access by SNMP (NMS) and Telnet/SSH (configuration, • CSA 22.2 No. 950-95 statistics and alarms) • IEC 60950 • Remote Software Upgrade by FTP • EN 60950 • Remote Configuration Upload/Download • UL 2043 • DHCP client for remote initial IP configuration About GO Networks GO Networks provides carrier class, cost-effective broadband wireless access solutions for large-scale, high-capacity indoor and outdoor deployments. GO Networks’ products offer superior coverage, range and performance for Telcos and mobile carriers in fast-growth global markets. They are designed to provide a complete wireless networking solution for voice, video and data based on 802.11 (Wi-Fi) and 802.16 (WiMAX) standards. GO Networks’ solutions offer a cost-effective alternative to expensive or non-existing infrastructure, delivering faster time-to-market, and a high-quality service that is reliable and scaleable to meet service providers' demands. GO Networks is headquartered in Mountain View, CA, U.S.A., with additional operations in Israel, China and Germany. GO Networks, Inc. ƒ 1943 Landings Drive, Mountain View, CA 94043, U.S.A. ƒ Tel: +1.650.962.2000 ƒ info@GoNetworks.com GO Networks, the GO Networks logo, Metro Broadband Wireless, MBW, Advanced Array Technology, AAT, WLAN Base Station, WLAN Sector Base Station, WLS, Wireless Network Controller, WNC are trademarks of GO Networks, Inc. and/or its affiliates in certain other countries. All other trademarks, registered trademarks, service marks or registered service marks are the property of their respective owner/s. Information in this document is subject to change without notice. GO Networks assumes no responsibility for any errors that may appear in this document. © 2005 GO Networks, Inc. All rights reserved. Confidential & Proprietary GN001-1-03.5


Document Created: 2019-07-10 19:07:21
Document Modified: 2019-07-10 19:07:21
© 2026 FCC.report
This site is not affiliated with or endorsed by the FCC