Directional Antenna Information

0615-EX-ST-2016 Text Documents

General Dynamics Mission Systems

2016-04-27ELS_176016

Product Specifications LNX LNX--6515DS 6515DS--VTM | LNX LNX--6515DS 6515DS--A1M Andrew® Antenna, 698–896 MHz, 65° horizontal beamwidth, RET compatible l Excellent choice to maximize both coverage and capacity in suburban and rural applications l Fully compatible with Andrew remote electrical tilt system for greater OpEx savings l Exceptional horizontal pattern roll­off and strong front­to­back ratio l Extended bandwidth allows one antenna to serve multiple frequency allocations l Great solution to maximize network coverage and capacity l The RF connectors are designed for IP67 rating and the radome for IP56 rating Electrical Specifications Frequency Band, MHz 698–806 806–896 Gain, dBi 16.7 17.6 Beamwidth, Horizontal, degrees 65 64 Beamwidth, Vertical, degrees 9.7 8.6 Beam Tilt, degrees 0–8 0–8 USLS (First Lobe), dB 17 17 Front­to­Back Ratio at 180°, dB 32 27 CPR at Boresight, dB 24 27 CPR at Sector, dB 15 13 Isolation, dB 30 30 VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 PIM, 3rd Order, 2 x 20 W, dBc ­153 ­153 Input Power per Port, maximum, watts 400 400 Polarization ±45° ±45° Impedance 50 ohm 50 ohm Electrical Specifications, BASTA* Frequency Band, MHz 698–806 806–896 Gain by all Beam Tilts, average, dBi 16.6 16.9 Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 0 ° | 16.6 0 ° | 17.0 Gain by Beam Tilt, average, dBi 4 ° | 16.6 4 ° | 17.0 8 ° | 16.4 8 ° | 16.8 Beamwidth, Horizontal Tolerance, degrees ±1 ±0.9 Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 USLS, beampeak to 20° above beampeak, dB 18 18 Front­to­Back Total Power at 180° ± 30°, dB 25 23 CPR at Boresight, dB 24 27 CPR at Sector, dB 15 13 * CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs. General Specifications Antenna Brand Andrew® Antenna Type DualPol® Band Single band Brand DualPol® ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 3 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: March 10, 2016 April 26, 2016

Product Specifications LNX LNX--6515DS 6515DS--VTM | LNX LNX--6515DS 6515DS--A1M Operating Frequency Band 698 – 896 MHz Performance Note Outdoor usage Mechanical Specifications Color Light gray Lightning Protection dc Ground Radiator Material Aluminum Radome Material Fiberglass, UV resistant RF Connector Interface 7­16 DIN Female RF Connector Location Bottom RF Connector Quantity, total 2 Wind Loading, maximum 878.0 N @ 150 km/h 197.4 lbf @ 150 km/h Wind Speed, maximum 241 km/h | 150 mph Dimensions Depth 180.5 mm | 7.1 in Length 2453.0 mm | 96.6 in Width 301.0 mm | 11.9 in Net Weight, without mounting kit 19.8 kg | 43.7 lb Remote Electrical Tilt (RET) Information Model with Factory Installed AISG 2.0 Actuator LNX­6515DS­A1M Packed Dimensions Depth 284.0 mm | 11.2 in Length 2765.0 mm | 108.9 in Width 411.0 mm | 16.2 in Shipping Weight 38.6 kg | 85.1 lb Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant by Exemption China RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV) ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system Included Products DB380­3 — Pipe Mounting Kit for 2.4 ­ 4.5 in (60 ­ 115 mm) OD round members. Used for wide panel antennas. Includes three clamp sets. DB5083D — Downtilt Mounting Kit for 2.4"­4.5" (60­115 mm) OD round members. Consists of two DB5083 heavy­duty, ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 3 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: March 10, 2016 April 26, 2016

Product Specifications LNX LNX--6515DS 6515DS--VTM | LNX LNX--6515DS 6515DS--A1M galvanized steel downtilt mounting brackets. This kit is compatible with the DB380­3 pipe mount for panel antennas with three mounting points. * Footnotes Performance Note Severe environmental conditions may degrade optimum performance ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 3 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: March 10, 2016 April 26, 2016


Document Created: 2018-11-02 06:39:54
Document Modified: 2018-11-02 06:39:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC