EnvironmentalImpact

0786-EX-CN-2018 Text Documents

Elta North America

2018-10-01ELS_217154

ELTA North America Request for FCC Experimental License Form 442 Confirmation Number: EL352177 Form 442 File Number: 0786-EX-CN-2018 1 October 2018 Question 9: Statement of Environmental Impact The specified locations for this application are rural and have a wide open area of mostly desert. At 10001 South Wilmot Rd, Tucson, AZ 85756- Approximately 0.5 mile to the west are a few scattered buildings. Approximately .25 miles to the north are a few scattered buildings. Isolated desert to the south and east. At 11300 South Houghton Rd, Tucson, AZ 75747- A few buildings surrounding with in 0.2 miles of the test site. The antenna will be mounted on the ground using a tripod and have a height of 6 feet.

It is the policy of ELTA N.A. that company personnel, customers, or members of the public are not subjected to RF power density levels that exceed the Maximum Permissible Exposure (MPE) limits as given in Part 1.1310 of the FCC Rules. Experimental testing will only be conducted with appropriate controls in place, and no personnel will be in an area of transmissions that will exceed the MPE levels. ELTA N.A. will have an RF Safety Plan which describes the procedures and controls necessary to comply with MPE levels during operations and maintenance. Table 1 - Power Density Analysis Parameter Value Frequency (MHz) 434 Transmitter Output Power (dBm) 34 Antenna Gain (dBi) 3.5 Ground Reflection Factor 1.6 Distance (feet) 5 Estimated RF Power Density 0.0491 (mW/cm2) Table 2 - Power Density Analysis Results Parameter Controlled Uncontrolled Maximum Permissible Exposer, mW/cm2 1.4517 0.2943 Minimum required distance, Meters .296 .643 Minimum required distance, Feet .9711 2.1095


Document Created: 2018-10-01 12:15:08
Document Modified: 2018-10-01 12:15:08
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC