Device datasheet

0788-EX-CN-2018 Text Documents

Daytona Aircraft Services, Inc.

2018-10-01ELS_217173

HNRRKIT Hangar Networked Re-Radiating Kit Technical Product Data Features • Amplified Roof Antenna Gain ≥ 35dB • Re-Radiating Amplifier with Power Supply Typical Gain 30dB • Optional Mounting Kit Hardware Roof Antenna Mount & Adjustable Re-Radiating Mount • Variable Gain Option with LCD Display Push Button Control in 1dB Increments 0-30dB gain Description The GPS Hanger Re-Radiating Kit (HNRRKIT) is a complete re-radiating system that allows re- radiation of the GPS L1 signal indoors. The HNRRKIT consists of an active roof antenna, a re-radiating amplifier with a wall mount plug-in transformer that powers the entire system, and a passive re-radiating antenna. The GPS L1 signal from the roof antenna is amplified and radiated indoors. Thus, if a receiver has line of sight with the re-radiating antenna, it can receive the GPS signal indoors up to 100 feet. A cable from the roof antenna to the re-radiating kit is required and can be purchased separately. REV. A 1

Roof Antenna Specifications, TA = 250C Parameter Conditions Min Typ Max Units Frequency L1 1.575 GHz Bandwidth 20 MHz Out Imped. (1) 50 Ω Pre-Amp Gain 35 38 dB Noise Figure 2.75 dB Output SWR 2.0:1 - Filtering 1626 MHz -20 dB 1500 MHz -10 dB Req. DC Input V. 4.5 5.5 Vdc Current 22 mA RF Connector Options Connector Options CONNECTOR STYLE CHARGE Type N-female NC 0 Re-Radiating Amplifier Electrical Specifications, TA = 25 C Parameter Conditions Min Typ Max Units Freq. Range Ant – J1 1.1 1.7 GHz In/Out Imped. Ant, J1 50 Ω Gain (1) dB 29 30 31 dB Input SWR (2) J1 - 50Ω 1.8:1 - Output SWR Ant - 50Ω 1.8:1 - Noise Figure Ant – J1 3.3 3.5 dB Current 20 mA Gain Flatness | L1 – L2 | ; Ant – J1 0.5 1 dB Reverse Isolation J1 – Ant 35 dB Group delay τd,max - τd,min : Ant – J1 1 ns Flatness Re-Radiating Amp System Power Supply Options Source Voltage Options VOLTAGE INPUT STYLE 110VAC Transformer (Wall Mount) 220 VAC Transformer (Wall Mount) 240 VAC (United Kingdom) Transformer (Wall Mount) Customer Supplied DC 9-32 VDC Military Style Connector Re-Radiating Amp Gain Control Options Standard Gain 30 dB (Custom Gain between 0-30dB available upon request) Variable Gain -3 ≤ Gain ≤ 30dB Variable Gain with LCD Display 0-30dB gain range with push button control in 1dB increments 0 Re-Radiating Antenna Electrical Specifications, TA = 25 C Parameter Conditions Min Typ Max Units Frequency L1 1.575 GHz Bandwidth 20 MHz Impedance 50 Ω Peak Gain 3 dBic Output SWR 1.5:1 - Polarization RHCP - REV. A 2

Part Number Configuration HS E W VG HNRRKIT N / 5 / 110 Options: HS = Hermetically Sealed E = EMI Shielding W = Weatherproofing Re-Radiating Kit Type: VG = Variable Gain knob control 0-23dB gain VGLCD = Variable Gain with push button control in 1dB increments 0-30dB gain HNRRKIT = L1 Hangar Networked Re-Radiating Kit Connector Options (Type N-female Standard): N = N-type, S = SMA, T = TNC, B = BNC DC Output Voltage 5 = Amplifier Output Voltage (included antenna requires 4.5-5.5 vdc--5vdc is default voltage) Source Voltage (Power Supply Options) 110=110VAC, 220=220VAC (2 prong Euro), 240=240 (3 prong UK) MC = Military DC Connector (User Supplies 9-32VDC) (Military DC Mating Connector is included standard with the MC power option) Contact GPS Networking Technical Support at 719-595-9880 or salestech@gpsnetworking.com for any questions regarding non-standard configurations and corresponding part numbers) REV. A 3

. —~_..._..._._NGC@: nectors): »1: Transmission Log Mag 10.0 cB— fRef 0.00 dB 4B Moasi: Miri_15/5.000 MHz 4 0.0210B 10 ~10 —20 —3 Start 1 000.000 MHz Stop 1 800.000 MHz P2: Reflection SWE 2.0 / Ref —9.000 gas?: Mfri 15/5.000 MHz 1.18 Start 1 000.000 MKz Stop i1 800.000 MHz : Mkr (MHz) dB 2: Mkr (MHz) 1> 1575.0000 30.021 1> 1575.0000 1.184 2: 1227.0000 29.057 22 1227.0000 1 .431

Performance: L1GPSA (L1 Active Antenna-Outdoor) Immunity to noise and interference Secure performance by attenuating noise and interference near GPS L1 frequency through triple filtering design Attenuation log MAG 10dB/REF0dB 0dB -70.964dB -65.294dB (-50MHz) (50MHz) SPAN:200MHz 1575.42MHz Immunity to lightning surge Model with enhanced immunity to lightning surge [IEC61000-4-5 Level 4 (4000V)] preventing antenna failure caused by induced lightning GPS L1 Antenna Shut out induced lightning GPS receiver Lightning arrestor REV. A 5

L1RRKPA Specifications (L1 Passive Antenna-Indoor Retransmit Antenmna) GPS ANTENNA SPECIFICATIONS Model No.: PA175S Antenna: Center Frequency 1575 ± 3 MHz VSWR 1.5:1 max. Bandwidth 20MHz min. at ‐10dB Impedance 50Ω Axial Ratio 3dB max. θ=0° Peak Gain 4dBic min. Ground Plane 70 mm x 70mm Gain Coverage ≥ ‐4dBic at ‐90° ≤ θ ≤ 90° (over 75% volume) Power Handling 1 watt Polarization RHCP Mechanical: Weight 48g max. Size 66 x 66 x 18 mm Connector SMA jack Environmental: Working Temperature ‐40°C< T< +85°C Storage Temperature ‐50°C< T< +95°C Vibration Sine Sweep,1G(0‐P),10‐150‐10Hz each axis Humidity 95%~100% RH Note: Specifications subject to change without notice. REV. A 6

Mechanical Re-Radiating Kit Amplifier Dimensions: Height: 1.3” Length (not including connectors) Body: 2.5” Base Plate: 3.25” Width (not including connectors): 2.5” Weight: 11 oz. (316 grams) o o Operating Temp. Range: -40 to + 75 C Finish Housing and Base Plate: ELECTROLESS NICKEL PLATED MIL-C-26074C CLASS 1, .0001-.0003 MAX Finish Lid: ANODIZE, TYPE II, CLASS 2, BLACK, per MIL-A-8625 MC-Military DC connector (optional) REV. A 7

Mechanical and Environmental Active Antenna (Outdoor) Dimensions (Unit:mm) Mounting: Pipe/Pole Mount included (optional pipe/base mount available) CCAH32ST11 o90 88.5 98.4 Radome 22.5 Bottom Weight Approx. 187g Radome :Polycarbonate Material Bottom :Die-cast aluminum Temperature: -40C to + 85C Humidity: 40-95% RH (below Dew Point) Rev. A 8


Document Created: 2018-07-31 14:48:30
Document Modified: 2018-07-31 14:48:30
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC