Directional Antenna Data Sheet

0028-EX-ST-2016 Text Documents

Booz Allen Hamilton Inc

2016-01-08ELS_171194

Product Specifications LNX LNX--6514DS 6514DS--T4M Andrew® Antenna, 698–896 MHz, 65° horizontal beamwidth, fixed electrical tilt l Broadband, providing future­ready single antenna for application in 700 MHz and existing 850 MHz cellular operation l Air dielectric design provides superior PIM performance with repeatable antenna­to­ antenna gain and pattern consistency l Single piece radome provides long term mechanical stability l Proven core design technology, with over 1,000,000 similar antennas deployed l Exceptional USLS pattern shaping for optimizing coverage and interference mitigation for LTE applications l Specifically designed to have physical dimensions similar to most existing cellular antennas OBSOLETE This product was discontinued on: December 31, 2015 Replaced By LNX­6514DS­VTM Andrew® Antenna, 698–896 MHz, 65° horizontal beamwidth, RET compatible Electrical Specifications Frequency Band, MHz 698–806 806–896 Gain, dBi 15.9 16.6 Beamwidth, Horizontal, degrees 65 65 Beamwidth, Vertical, degrees 12.0 11.0 Beam Tilt, degrees 4 4 USLS, typical, dB 18 18 Front­to­Back Ratio at 180°, dB 33 33 Isolation, dB 30 30 VSWR | Return Loss, dB 1.35 | 16.5 1.35 | 16.5 PIM, 3rd Order, 2 x 20 W, dBc ­153 ­153 Input Power per Port, maximum, watts 500 500 Polarization ±45° ±45° Impedance 50 ohm 50 ohm General Specifications Antenna Brand Andrew® Antenna Type DualPol® Band Single band Brand DualPol® Operating Frequency Band 698 – 896 MHz Performance Note Outdoor usage Mechanical Specifications Color Light gray Lightning Protection dc Ground Radiator Material Aluminum ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 31, page 1 of 2 2015 January 8, 2016

Product Specifications LNX LNX--6514DS 6514DS--T4M Radome Material Fiberglass, UV resistant RF Connector Interface 7­16 DIN Female RF Connector Location Bottom RF Connector Quantity, total 2 Wind Loading, maximum 617.7 N @ 150 km/h 138.9 lbf @ 150 km/h Wind Speed, maximum 241 km/h | 150 mph Dimensions Depth 181.0 mm | 7.1 in Length 1847.0 mm | 72.7 in Width 301.0 mm | 11.9 in Net Weight 17.4 kg | 38.4 lb Packed Dimensions Depth 353.0 mm | 13.9 in Length 2098.0 mm | 82.6 in Width 429.0 mm | 16.9 in Shipping Weight 28.7 kg | 63.3 lb Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant by Exemption China RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV) ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system Included Products DB380 — Pipe Mounting Kit for 2.4"­4.5" (60­115mm) OD round members on wide panel antennas. Includes 2 clamp sets and double nuts. DB5083 — Downtilt Mounting Kit for 2.4"­4.5" (60 ­ 115 mm) OD round members. Includes a heavy­duty, galvanized steel downtilt mounting bracket assembly and associated hardware. This kit is compatible with the DB380 pipe mount kit for panel antennas that are equipped with two mounting brackets. * Footnotes Performance Note Severe environmental conditions may degrade optimum performance ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 31, page 2 of 2 2015 January 8, 2016


Document Created: 2019-02-16 10:59:39
Document Modified: 2019-02-16 10:59:39
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC