Exhibit 1

0710-EX-ST-2018 Text Documents

BAE Systems Information and Electronic Systems Integration Inc.

2018-04-19ELS_208279

                                                                                          Exhibit 1



        1.      Introduction

        By the instant application (“Application”), BAE Systems Information and Electronic
Systems Integration Inc. (“BAE Systems”) requests that the Commission grant special temporary
authority (“STA”) to permit BAE Systems to operate the facilities (the “Facilities”) specified in
the instant application. STA is requested for a period of six (6) months.

       While TV White Spaces operation has been generally authorized by the Commission,1
the IEEE 802.22 White Space equipment for which the STA is being requested has not yet
received equipment authorization from the Commission. Thus, BAE Systems requests an STA
for May 19, 2018 – Nov 19, 2018 (6 months) to use equipment that is still in the approval
process.

        2.      Purpose of the Operation

        This testing is a critical part of technology development for the DARPA Rapid Attack
Detection, Isolation and Characterization Systems (RADICS) program. This program is
investigating the transmissions in the un-used TV channels aka TV White Space to meet the
nation’s critical infrastructure and power grid communications needs in case they come under
cyberattack. The purpose of this test is to demonstrate communication network functionality on
the TV White Space.

       The testing will occur at 4 locations - in New Hampshire, New York, Illinois and
Connecticut on a temporary-fixed basis. Within each radius, a base station unit and up to six
subordinate CPE units will be temporarily fixed for operations. For each location, unused TV
White Space channels have been selected from an approved White Space Database Provider
(Google).

        3.      Other Issues

                A.      Transmit Directionality

                Up to two base stations and six CPEs total will be located within each location
        radius. The base station unit will transmit with an omni-directional antenna. The CPE
        units will transmit with directional antenna that may be aligned along any azimuthal line
        of bearing.




1
 See In the Matter of Unlicensed Operation in the TV Broadcast Bands, Second Memorandum Opinion And Order,
FCC 10-174, ET Docket Nos. 04-186 and 02-380 (2010); In the Matter of Unlicensed Operation in the TV
Broadcast Bands, Third Memorandum Opinion And Order, FCC 12-36, ET Docket Nos. 04-186 and 02-380 (2012);
In the Matter of Amendment of Part 15 of the Commission’s Rules for Unlicensed Operations in the Television
Bands, Notice of Proposed Rulemaking, FCC 14-1444, ET Docket No. 14-165 and GN Docket No. 12-268 (2014).


           B.       Antenna Data

           Omni Antenna:

Mfg.       Model          Frequency         Gain      BW
           Number         Range
Telimart   TM520V-        470-570 MHz       6 dBi        Freq           E-Plane    H-Plane
           OMNI-6                                        MHz             deg         deg
                                                      470-570 MHz         30         360


           Directional Antenna:

Mfg.       Model          Frequency         Gain      BW
           Number         Range
Telimart   TM550L-        400-700 MHz       9 dBi        Freq            E-Plane   H-Plane
           LPDAYG-9                                      MHz              deg        deg
                                                      400-700 MHz          60        45


           Beamwidth/Orientation:

           Location 1 (NH) – Beamwidth/Orientation:

                (a) Width of beam in degrees at the half-power point: 60

                (b) Orientation in horizontal plane (degrees from True North):
                180 degrees for 3 CPEs and 270 degrees for the other three

                (c) Orientation in vertical plane (degrees from horizontal): 0
                degrees


           Location 2 (NY) – Beamwidth/Orientation:

                (a) Width of beam in degrees at the half-power point: 60


                (b) Orientation in horizontal plane (degrees from True
                North): 315 degrees for 4 CPEs located on the Plum Island,
                NY, 225 degrees for one CPE located on the Long Island, NY
                and another CPE located in New London, Connecticut, at 225
                degrees.


                (c) Orientation in vertical plane (degrees from horizontal): 0
                degrees


               Location 3 (IL) – Beamwidth/Orientation:

                    (a) Width of beam in degrees at the half-power point: 60

                    (b) Orientation in horizontal plane (degrees from True North):
                    315 degrees for 4 CPEs, 225 degrees for one CPE and another
                    CPE located at 225 degrees. All CPEs will operate at the
                    University of Illinois Urbana Champagne Campus.

                    (c) Orientation in vertical plane (degrees from horizontal): 0
                    degrees


               Location 4 (CT) – Beamwidth/Orientation:


                    (a) Width of beam in degrees at the half-power point: 60


                    (b) Orientation in horizontal plane (degrees from True
                    North): 315 degrees for 4 CPEs located on the Plum Island,
                    NY, 225 degrees for one CPE located on the Long Island,
                    NY and another CPE located in New London, Connecticut,
                    at 225 degrees.


                    (c) Orientation in vertical plane (degrees from horizontal): 0
                    degrees

               C.     RF Source

               The transmitted signal for the base units will be provided by the Saankhya
Laboratories White Space Base Station (Model No. SLB802ODU) using a non-directional
antenna (Model No. TM520V-OMNI-6). Transmission from the satellite CPE units will be
provided by the Saankhya Laboratories White Space Customer Premises Equipment (Model No.
SLC802ODU) using a directional antenna (Model No. TM550L-LPDAYG-9). The output power
of the system will be measured and verified to meet the radiated output power limits set forth in
the license and the TV WhiteSpace Regulations (e. g. 4Watts EIRP).


               D.      Prevention of Interference

                BAE Systems hereby advises the Commission that the tests to be conducted under
the requested Commission authorization are to be conducted at each location within the 3-mile
radius of operation being requested. For each of those physical locations, the operators will
verify if the TV WhiteSpace Channels are available based on the commercial white space
databases.

                  Station Location 1: For operations in New Hampshire, the transmission will be
conducted primarily at the BAE Systems Merrimack and Litchfield facilities. Up to two base
stations and six CPEs total will be located at the two facilities, with the number of transmitters at
each location determined by the results of testing. Such location will result in the separation of
the test facilities from other existing transmit or receive facilities.

                The IEEE 802.22 Base Station (BS) will be located at the BAE Systems 130
Daniel Webster Highway, Merrimack New Hampshire Test Range. The BS will use an omni
directional antenna. Three Customer Premises Equipment (CPEs) will also be located at this site.
They will use directional antennas. Their antennas will point in the direction of Base Station at
100 degrees with respect to True North going clockwise.

              Additional Three CPEs will be located at the BAE Systems Litchfield Facility.
The antennas of these three CPEs will be pointing towards the Base Station located at the 130
Daniel Webster Highway Facility. Their antennas will be pointing at 75 degrees anti-clockwise
from the True North. All antenna placements will be 10 meters above the Ground Level.

               Please see Figure 1 attached for map.


                Station Location 2: For operations in New York, the transmission will be
conducted primarily on Plum Island. The base station will be located there, and up to five CPE’s
will also be located on the island with directional antennas oriented such that their line of bearing
is directed towards the base station. A CPE may be located on Long Island, at the Plum Island
Animal Disease Center Reception Facility, with its directional antenna oriented such that its line
of bearing is towards the base station on Plum Island. Another CPE will be placed in New
London Connecticut and will communicate with the White Space Base Station located on the
Plum Island, NY.

               The IEEE 802.22 Base Station (BS) will be located in Plum Island. It will use an
omni directional antenna. We anticipate 4 CPE s to be also located within 100 meters of the Base
Station. Another CPE will be located near the Orient Point Ferry on the Long Island. Its antenna
will be pointed at the BS at 45 degrees clockwise from true North. Finally another CPE will be
placed at the New London, CT facility. All antenna placements except for the one in New
London, CT will be at 10 meters above the Ground.

               Please see Figure 2 attached for map.


                Station Location 3: For operations in Illinois, the transmission will be conducted
on the campus of the University of Illinois at Urbana-Champaign. It is anticipated that
separation between CPEs and base station will be relatively small (~100 m) and will take place
in the vicinity of the Coordinated Science Laboratory.

               The Base Station will be located at the Coordinated Science Laboratory with three
CPEs located within 100 meters of the BS. Another CPE may be located 200 meters away from
the Base Station in the South West Direction and one more CPE will be placed in the North East
Direction at 300 meters from the BS. All antenna placements will be 100 meters above the
ground level.

               Please see Figure 3 attached for map.

                Station Location 4: For the transmissions originating from the New London, CT
location, the Customer Premises Equipment (CPE) will be placed on top of a hotel building. It
will be using a directional Yagi antenna that will have its beam-pattern in the direction of Plum
Island where the IEEE 802.22 Base Stations using an Omni Directional antenna will be located.
The New London, CT, CPE will communicate with the Base Station on the Plum Island. We
anticipate the antennas to be placed on top of a hotel building structure. It will not extend more
than 6m above the top of the building structure. We anticipate the overall height above the
ground to the tip of the antenna to be 40 m. The Elevation of the ground at the antenna site above
the mean sea level is 10 m.

                The CPE directional antennas placed at the New London Site will be facing away
from the nearest aircraft landing area located at the Groton New London Airport. The aircraft
landing area is at 110 degrees clockwise from the True North, whereas our directional antenna
will be pointed at approximately 225 degrees clockwise from the true north.

               Please see Figure 4 attached for map.

               E.     Stop Buzzers

                      Primary: James T. Dolan – (202) 580 5311
                      Alternate: Apurva N. Mody – (404) 819-0314


LOCATION MAPS


             Station Location 1 (NH):




Figure 1. Station Location 1 Map.


             Station Location 2 (NH):




Figure 2. Station Location 2 Map.


             Station Location 3 (IL):




Figure 4. Station Location 3 Map.


             Station Location 4 (CT):




Figure 4. Station Location 4 Map.



Document Created: 2018-04-19 20:26:30
Document Modified: 2018-04-19 20:26:30

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC